TelePresence and Video Infrastructure

Hi All,Need your valuable suggestion/ advice for the below mentioned issue.We are unable to make any video conferencing calls outside the country where possible locally in a newly installed SX20 Telepresence ( Upgraded recently replacing one Cisco/Ta...

I have new install TelePresence Content Server.Existing system have TMS, TMSXE and it's working fine. I can booking endpoint, MCU via microsoft outlook.I can manually calling to recording server and it can record normally.Currently I would like to ad...

We have a CISCO Video Conferencing equipment SX20 bought in 2013. The machine is getting rebooted automatically. We had contacted the Vendor from whom the equipment was purchased. They have informed that we have to get keys from CISCO for firmware up...

I can't find any documents regarding firmware availability or updates for this camera model.  It's connected to a C60 TC7.2.0 and in the Peripherals page, the camera model is Cisco PrecisionHD 720p  and the software ID is S01692-3.0Final [ID:30038] 2...

 Dearswe have 2921 CME , if I configured the FXO as a Connection plar opx directly to any extension & disconnect the call from the PSTN side the call is disconnecting perfectly, but when I introduce my AA through the B-ACD or the CUE any call origina...

Hi All, Dear experts, I have two sites HQ & Branch.below are my questions for Expressway Core & Edge Cluster1. Can i create one cluster for 6 sever for  Expressway Core and distribute 3 server in HQ &  3 server in Branch for HA2. Can i create one clu...

HelloIm often get the following error in the CDR_log:Participant "No" (<<IP>>) left the conference Disconnect reason "H.245 socket error"; Time in conference <Time> ; Participant called in; Protocol "H.323"; Media encryption status "encrypted"Any Ide...

Kindly advice for controlling the SX20 with crestron control system.

I found that the new auto-wake on detected presentation source introduced in the TC7 software version is stopping me from improving our meeting rooms.I would like to move away from having 1 vga cable for Cisco and 1 for direct connection to projector...

Dear Experts. I have the below setup  to support video conferencing. I have SX20 and cisco jabber registered to call manager (as SIP). I have MX3000 endpoints are registered to VCS as H323 ID. we Have conductor and MCU to support video conferencing. ...