TelePresence and Video Infrastructure

The T1/T3 Administrator Guide http://www.cisco.com/en/US/docs/telepresence/endpoint/t3/guides/telepresence_t1_t3_admin_guide_tcu42.pdfPage 30 "Appendix 1—Factory reset of TCU"Step 4: Format the USB stick (FAT1/T32).I believe it is a typo. Since FAT1/...

Dear Team,We have an MXP edge 95 with ISDN BRI Line connection, Here when we connect the call after 5-10 minutes the call gets disconnected.Currupted Data Recieved message comes.and also on diagonostic page during the call, Frame Loss Total & Capabli...

Need advise on how to convert a SIP call to H.323 call.I have a SIP incoming call to VCS-A and I would like the VCS-A to send the call to VCS-B as a H.323.  Can this be done and how?Thanks,Khoa

Hi All,       I have a a problem with the LDAP connection of the VCS control.As far as I have configured everything in the lab with the port of 389. That works fine.In another case at my customer, I need to use the port 3268. The LDAP connection is g...

Hello,How to generate the CDR stats from the CUCM ?For information, the CAR has been activated.Thx

have the software ruinning in basic mode on my windows 7 pc also have a cisco camera on the network,I can get bthe monitor to know it is there, but it doen not connect.theyb are on the same subnet and there is just switch ports between them.what am I...

Dear Forum!I'm facing the following issue. One of the older C20's is configured to register to a gatekeeper using a specific domain, which is equipped with the appropriate srv records (h323rs, h323ls and h323cs). The C20 is running the version TC3.1....

I'm curious how much effort is made to test interoperability between Cisco and Polycom.  I cannot be the only one that dreads troubleshooting interop issues in the telepresence community.  I know that Cisco will help me as far as they can on the cisc...

I am creating an order for a CTS-P55C40-K9.  My client has listed the following options as what they would like.Software 5.x EncryptionCodec C40 buried optionInTouch 8 + PID for ServiceDNAM III buried optionPrecision HD 1080p 12x unit + auto expandPr...

Hi I got a temprature issue at some Codec`s C40-C90.try to do the xstat sys comand:xstatus SystemUnit Hardware Temperature But only got: xstatus SystemUnit Hardware Temperature*r Status (status=Error):    Reason: No match on address expression    XP...