Dear
I woulk to upgrade CUCM 5.0 to 11.0 , what are the steps to achive this task ?
regarding license how it will be from 5.0 to 11.0 ?
thanks and regards
We are currently running version 9.X on all our voip applications. Our Unity Connection server is currently running ELM for all Clusters (2) as well as the message License. We are a Cisco partner and our license falls under CUWL, during the migrati...
Dear
I Woulk like to upgrade CME to CUCM 11.0 , how it will be the migration step by step and the License ?
is there tool to help me regarding the License ?
is there tool to help me regarding the migration ?
thanks
Customer currently has VM cluster running software below and will be upgading to 10.5 using PCD on same hardware. I am a little confused with the various upgrade guides etc. Since this in on the same hardware do we need to deploy the OVA for t...
Dear All
i have MCS version 5.1(2) to UCS VM version 11.0
i read these steps below :
A) Migrate the legacy W1/L2 to 6.1(5) or 7.1(5)
B) Migrate PCD M1 to 11.0
Step A and B will do both in UCS VM server , it is right ? if not how it will be ? beca...
Hi We have CUCM 9.1
How can I get the sum of registered phone device alert via email? I can see the number of registered device in RTMT . But It's not possible to monitor it every time . Any recommendation about it?
Hi,
CUCM 10.5
I have a problem to make a new Translation Pattern for die following external calling , I hope someone can support me:
I would like make a Pattern for 0049 (0), I made this pattern:
000.49!
Called Party Transformations : PreDot fo...
Hi guys,Need a bit of help.... We have CUPS on version 9.1.1.30000-3, I have installed 9.1.1.31900-1 on both servers… I have switched versions ok in the Publisher, but it fails on the subscriber….9.1.2.11900-12 is the version of the CUCM Cluster !!!T...
Hello,
We are facing common disk partition issue because of this are taking backup of Activelogs in CUCM using Core FTP mini0sftp-server.
where getting error of "Invalid download directory specified."
PLM is version 10.5 & Unity connection is version 11.0. Current status for Unity connection in PLM is "Unrecognized license type". Because of this error, I am not able to add any user to the unity connection. Everything is working fine for the exi...
Hello Team,
My Company just got a new BE 7000.
After installation and bringing up the BE7k and CUCM 10.5, it is showing that the CUCM is running on a demo license, this surprised me because I was expecting it to be pre-licensed.
My questions is how d...
I bought a CUCM 10.5. It is pre-installed on the 6000 server.
When I logon to the CUCM GUI, it says the system has not synchronized with Cisco Prime License Manager.
I have the DVD "Includes License and Warranty".
How do I use the Cisco Prime License...
Hi all,When I set up the CTI template, I chose owner userid as "none" but then when syncing the AC, I get the message on the sync report for every device of "Error -206 The specified table (owneruserid) is not in the database."If I set the template t...
I intalled ESXi 5.0 with free license key, and I have all my phone servers on it. But now ran into 32 gb RAM limitation.
I have two questions:
1- In ESXi license configuration, it says "Up to 32 GB of memory" under Product features, Also under edit...
