I have CUCM v10.5.2.15900-8 all aspects are working fine. We are fully integrated with Unity Connection, IVR,and internal CM 4 digit DN works 100% except for dialing behavior when a user selects 'Missed calls', scrolls to a 'Missed call' and selects ...
Forum Posts
As the title states is there anyway to retrieve the OS password, cli password? I have access to unity connection administrator only at this point. I have already seen how to reset the admin password which I don't need. CLI or OS please
I had a quick question regarding CUCM and CUC LDAP integration. If user A is defined with extension 1234 in either application, but then I need to re-assign that extension to user B, do I need to delete the user in CUC/CUCM and then to another impor...
Resolved! Vulnerability on CUCM QID 38692
Hi All, Our customer had 3rd security vendor that checking the Vulnerability on their CUCM. There are some vulnerability on CUCM as capture below : Do you have any advice or idea about it?
Hello, I have implement the SRST router on the customer side and he needs b-acd as will with the below option: ** welcome please dial the required extension or 0 for operator ** thank you guys in advance.
Hello, have un CM BE3000 with have iphones connected. Since a few day, the IPhones begin unregistred and can i communicate with other. I join the error message. I need your help
I have CME Router 2921 with CUE Module, i need a script similar to the below: 1. Welcome to ABCD Company for Arabic Press 1 for English press 2 2. if the User press 1 "he should hear this prompt but in arabic language"--> for sales press 1, for S...
HI I have a 4331 GW i use this gw connect E1 pri with MGCP now the E1 is MULTIPLE_FRAME_ESTABLISHED and GW connect to CUCM is OK but i can't place a call to this E1 form CUCM display this call is reject also can't receive call from E1 d...
We are currently running CUACA v 11.0.1 on Windows Server 2008 (32-bit) and would like to migrate to Server 2012 R2 (64-bit). Has anyone done this migration and have any steps to follow to keep the configurations? Is there a supported migration pa...
Hi All I have a CUCM 11.5 and Cups 11.5 and the changes made on CUCM does not replicate to the CUP, but if i restart the dir sync service on cup the changes are replicated. On system dasboard apears "Sync Completed, but currently failed to connec...
Dear Cisco community, we are using the Single Inbox (SIB) feature without ViewMail in order to receive voicemails as .wav emails. Why would I configure a relay address under the User page --> Message Actions menu, if I have already configured SIB t...
Resolved! Outgoing calls to H323 gateway
Hi all, I have an outgoing calls issue. Here we go, I have two CUCM installed (4.3 and 11.5) and a trunk working fine between them, the old one is going to be replace by the 11.5 but the infrastructure will use the same gateway with BRI interface....
I've replaced the receptionist phone and now the Attendant console is not showing the line status or incoming calls. I've updated the application user to make sure that it controls the phone. Any other places that I need to update?
I needed to reinstall a Unity Connection 8.5 server (server crash due to power failure).After the reinstallation and reconfiguration of the CUC, the same does not synchronize and / or import users from CUCM (version 8.5).The CUCM is integrated with L...
My customer is currently running CUCM 9.1 and using Expressway for Jabber MRA version 8.2.2. We are planning to upgrade CUCM to 11.5 so understand that Expressway will need upgrading. I'm trying to find some documentation that states what Expressway...
