Unified Computing System Discussions

Hello Team, Need you expert comments on syslog part !! Syslog server configuration locally and remotely. What i understood from local destinations, if "enable" a syslog file will be created on both the FIs. Size of each file will not exceeded 419430...

I have some B200-M4s populated with 24x 16GB = 384GB.  I want to remove 8x 16GB, and add 8x 32GB, to bring the total up to 512GB.  I confused as to which 16GB DIMM's I should remove/replace.   I'm reading http://www.cisco.com/c/en/us/td/docs/unified_...

I am seeing RX input errors on my port channel from my IOM-B to my nexus 5k on my nexus 5k port channel I see from A side input rate 7.37 Mbps, 310 pps; output rate 2.49 Mbps, 260 pps RX 27428302023 unicast packets 20962452 multicast packets 3319...

Hi Guys, I want to have a jump server to be directly accessible and rest all infra including the Routers and Switches to be accessible via that jump host. Earlier we had a UCS C series server (as the jump server) and UCS B series  for other VMs , T...

If the disks are configured as jbod, and you select the option in the disk group to "use jbod disk", when the raid group is created, does this basically bypass all of the nice stuff the controller does, like caching? Is the proper way to have them a...

Hi all, I need people's advices about SNMP monitoring of UCS. I would like to know the behavior of UCS when response to SNMP polling: 1) Given Solarwind monitoring software polling UCS with X seconds interval. How will FI response to that request?- ...

Hi all I’m trying to connect to my server blade via kvm and I get the following error. Please see attach. Thanks. 43

Hi there, I have B200 M3 Cisco Blade and having 256 GB RAM installed. want to upgrade to 512 GB. Currently on server 16 Modules of 16 GB DDR3-1600-Mhz-RDIMM/PCS-12800/dual rank /1.35v. So want to check which of the below 32 GB module  will supprt ...

Hi I have a UCS-C220-M3SBE3 with a fail hard drive the HDD part number is A03-D500GC3 and this HDD have 500G capacity, but this part number is end of sale... the replace part number for this HDD is UCS-HD1T7K12G and this HDD have a 1T of capacity. Ca...

Hello, I am in the process of switching from VMware Horizon View to XenDesktop.  I am attempting to convert a Cisco ucsc-c240-m3s from vsphere to XenServer.  I started trying to install version 7.1 of Xenserver, now I am playing with 7.2.  On the UCS...

Hi, I have a attached a screen shot with details showing the firmware version of fabric interconnect, ucs manager, vic adapters , etc. I have 1 server in the chassi. I have configured 1 server port, and several uplink ports which are connected to la...