Hi all,
trying to install Windows 2003 R2 server on UCS B420 M4 with local disks.
windows cd boots normal but later i get BSOD error about ACPI.
any ideas or anyone who had same problem before?
thanks
I have a customer who is seeking the following:
We are interested in receiving a copy of the test results for the 5 different patches that Cisco released. I would expect that Cisco would have 5 sets of test results (1 for each release of code). We...
Hi guys, I would like to know about the Cisco VPC-DI (vEPC (MME+SGW+PGW)), I have to install a vEPC with UCS 5800 (with 5 blades B200) and two Fabric Extender 6248UP, however I don't get it documentation about this configuration. I would like that he...
Please review If i can follow the below steps.
1- Create a New Boot Policy
2- Modify the Updating Service Profile template to use the New Boot Policy.
3- With Maintainence Policy Setup to UsrAck, When I Ack and reboot a single host the new boot pol...
Does anyone know if it is possible to expand a logical disk array (RAID5) that has 3 phys disks + 1 hot spare to 4 phys disks + 1 hot spare, without rebuilding and wiping the data from the array? This is on a UCS M240 Series 3 with an LSI MegaRAID 9...
Hi all,
I wonder if i can directly connect 2 6248UP's without going over an upstream nexus
What i want to accomplish is this :
I have a number of racks all equipped with 6248UP's (main&backup). In 1 rack i have storage (NAS&SAN) that is only used ...
ok i have 5 usc machines and doing the bios updates and CIMC updates on 4 machine no issues . for some reason on the last machine it waned to be a pain .. i did the bios update just like all the other machines that are working and online .. and th...
Hi everyone,
I'm managing an UCS system running firmware version 3.1(2b).
Currently, there are a pair of port-channel displaying state down when checking by CLI or monitored by Solarwind (portchannel 1440 & 1441 in attached images).
CLI logs on FI-A:...
I have read this document:
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/110511-ucs-fw-mgmt-00.html
Specifically:
Image Delete
Here are some best practices to consider when you delete images:
You can use the UCS ...
hello everyone,
i need your help, with some questions .
1. how i can to monitoring my UCS Blade? kind of software with lic or with no lic
2. how i can connect 2 chassis over the WAN (L2) for one Management?
TNX
We have one rack mountable server connected to our UCS mini that then connects to our SAN.
We want to populate the C220 with 16 x 2TB disks. As I understand it the onboard RAID controller can only run 8 disks.
Therefore our company purchased a Cis...
Is QLogic QLE2562 HBA card with part number P/N: PX2810403-01 L compatible with Cisco UCS C220 M3 ? As the card cannot be read by the bios and when the server detect it, after restart it disappears and so on.
I'm trying to get a dump of service profile name to management IP. I cannot seem to get the outband IP of the SP from powershell. Any assistance would be appreciated.
Hi all
I have a UCS 8501, and two C220 M , the last 2 will be reinstalled with Linux, my question is ,there any way I can configure the 8501 to manage the C220?
Thanks.
