Voice Systems and Accessories - Small Business

Hello everyone, I would report freezing of SPA504G phone when is unable to resolve LDAP server IP address through DNS query. Running firmware is the latest 7.6.1 . This only happens when DNS isn't available. DNS server is down, misconfigured IP addre...

I want to connect two  SPA8000 voip gateways. Is that possible to do? if it is possible how to configure these devices?

Our Telephone MUX failed recently and is unrepairable.  We purchased two SPA8000 Phone Adapters with the intent to connect them by way of a local area network.  We have five analog phone lines to use on ports L1-L5 at the office side of the network a...

Hello everyone. Since upgrading to the latest firmware version 7.5.7 , we have had a few users using the SPA504G report intermittent issues (happens once or twice a week) with their SPA500DS sidecars where their sidecar displaying a BLF list is "froz...

Good Day, I use a SPA122 ATA (in bridge-mode behind a Netgear DGND3800B) for my VoIP comms. The VoIP-evironment is provided by DT Deutsche Telekom in Germany. Voice comms is not a problem. From the analog telephone, that is connected to the ATA (S...

Hi, does anyone use combination of SPA232D and IP Phone as extension to use PSTN from remote building? I'm trying to configure it out but no success. I'm following several guides and how-to abuot SPA3102 and PAP2 with no success. SPA232D works great ...

Hello, my SPA502G doesn't always play ringback tone. Even calling the same ext number, only sometimes I can hear the ringback tone. Can you help me? Thanks

I had my SPA 303 working wired just fine for over a year, and for a few months with the Cisco IEEE 802.11n 130 Mbit/s Wireless Bridge. Then I could not get past "Checking DNS" Going through recommended steps - firmware upgrade over wired connection i...

Can anyone please share their experience of installing and  confguring 4-5 cisco ip phone 7841 sets.

dear Experts,i am facing problem to configure pap2t and spa3102 devices for PSTN & FAX line.here is my scenario look into and give me your valuable feed back that what should i do.?  

I need to configure ad-hoc conference with SPA-50x on CUCM 10.X. By default the SPA support 3WC, but it does not use resources on the CUCM. I need support multy-party conference with SPA-50X on the CUCM 10.5 Somebody know: If this feature, is avail...

hi community, can somone guide me on how to generate reports for missed calls to particular extensions? or subscribe to these services and generate if necessary?

Hi guys, Our team of 10 sales people are currently using the Cisco IP Phone SPA504G. Due to the shift work that our employees currently undertake they are not always in together and the same time/day, do not always sit at the same desk and therefore...

Hi all, If my UC560 is configured using CCA and then I want to make changes using CLI( assuming that CCA is not available on laptop) , is that supported? Regards Sriram