Voice Systems and Accessories - Small Business

I am having some issues with some really basic telecom functionality on the UC540, can anyone comment?                   Set a different ring tone for a group call and an individual call – STAC are saying I need to give each extension 2 numbers – one...

Hi, I can see from this site: http://docwiki.cisco.com/w/index.php?title=Supported_System_Capacities&oldid=43381 that CMBE6k supports 1000 users of telephony. But is this per server? What if I deploy two servers, for redundancy and loadbalancing? Ca...

Hi there,I would like to do a factory reset on an SPA921 (5.1.8 firmware) - however when I go to do it, I am asked for an 'admin' password. I've never set an admin password and anything I try is not accepted. I don't care about any settings on the ph...

We have a customer that is reporting tiny gaps in the voice... not the gaps you would generally hear from packet loss or jitter... I guess I would equate the sound to morse code if you know what I mean.They said they have had the problem both on inte...

I have a SPA942 that all the lights are on steady (no blinking) and there is no screen or menu.No response when I press any of the buttons. I have tried both with power and with POE connection and I get nothing.I thought maybe the SOS tool would reco...

...

                   I am unable to access the phone support for my spa 122!   Any ideas?

I've a number of clients using SPA502G's, SPA504G's, and some of the older/Linksys SPA-922 devices with a hosted PBX.Getting these devices to resync via http is really handy, e.g.http://192.168.1.12/admin/resync?http://prov.domainname.com/somethingI ...

We provision our SPA 122 ATAs via a provisioning server. We have been using this method successfully to register our ATAs with our voice server. For the past two days we have been unable to register any 122 ATAs. The ATAs are pulling the configuratio...

Hi All,I have an analog phone on a FXS port - and I'd like it to be able to go offhook and make outbound calls without having to dial 9 first.This phone has no need to dial other extensions ... it just makes calls outbound to the PSTN.Outbound to PST...

I have a question regarding an ATA 186. I want to connect this ATA 186 to a UC540 wich is on another location.We have a Cisco 887 on the remote location and i want to make a IP SEC tunnel between the UC540 and the 887.Is this possible? If yes can i g...

Hello,I am intrested in learining more about the the be 3000. I am fimliar with the uc 540 and I know if has the Smart Call Connector Suite.Does the BE 3000 have complimenting product like the Smart Call Connector Suite?

Located in the Jacksonville, FL USA area, cannot seem to create a dial plan for 7 digit dialing. Area code is (904) and I don't see an option where to change from 10 digit to 7 digit outbound dialing. Am I missing something?