Voice Systems and Accessories - Small Business

I have accidentally lost record of the admin password for a UC500, and I am unable to reset the admin password through the console - apparently No Password-Recovery (http://goo.gl/CtEwW) is enabled:line con 0  no modem enableDo I have any recovery op...

Does any one know of any software or setting to connect my SPA3102 through web tunnling or to bypass my ISP blocking SIP traffic. Any help will be highly appriciated

Hi I am trying to configure two SPA3102 devices which are on dynamic IP's (connected through Internet) to share PSTN lines of each other devices.Further it should be able to make terminal to terminal calls as well .(Like an intercom phone).Any help w...

Hi,I currently run a UC320 routing both voice and data, with a simple ADSL modem ahead of it - all runs well, with the exception of all too frequent disconnects on the ADSL modem.So I'm considering a SRP547W to replace the ADSL modem. If I use an SRP...

On the SPA 301 IP Phone, is there a way to disable to volume control button? I'm going to be installing many of these phones in a public setting (Help phones in classrooms)  and want to make the phone as dummy-proof as possible. The concern is that i...

Hello,We have a fax machine that we woudl like to connect awya from the UC320 and woudl like to use a gateway to convert ethernet (or wifi) to connect it and have it close to the secretary.  Which gateway can do this that you recommend?  Any other hi...

My customer would like to stop the playback of the time/date/duration of the message before hearing the message.  I can't find any configuration settings for mailboxes.  I saw on an old post here that to keep configuration simple, the ability to chan...

Hi,I'm using a UC_560 with 4 FXO lines attached to it, and several IP phones connected.The question: How can I see which phones are making (or receiving) a call in a given time, the line they are using and the number they have called?Previously we ha...

Two issues I've seen with my SPA112:1.  If I change the NTP server to "Manual", and try to enter a server URL (such as 0.pool.ntp.org), I get "Invalid NTP Server Address".2.  The SPA112 does not seem to have adjusted automatically to DST, at least ju...

Im an owner of a SPA922 and I have tried everything to reset this phone to its factory default but it persists with the Passwords.  I have done the following:  1.  Tried going to the phones Display and do a factory reset, password requiered, 2. I tri...

I have a system with UC320W and SPA8800 it is possible to use specific FXO port to specific number?example0XXX XXXX use SIP VOIP Provider, FXO1 , FXO2 , etc..etc.. sequentially03XXX XXX use only FXO8 (latest of SPA8800) --- this is the mobile phone p...

Hi:   Is Cisco working to provide mobility solucion with the UC300 like Cisco Call Connect, Mobile Connect for iphone,  Android solutions, etc.?Regards,Diego.

What is the best/recommend device to bring active dual WAN connections into a UC520 environment? Our environment is pretty basic but we do have a few teleworker phones (both IPsec and SSL).I did find an article on how to configure one of the switch p...

Hi,ı need UC560 CUE versiyon 7.1.3 Tr language packed for UC560. I have UC520 TR language but it didnt work at UC560. How can find this file?thanks