Voice Systems and Accessories - Small Business

I realize the UC320 does not support SNR.  We have a situation where 6 people work permanetly as remote workers thus they do not have IP phones in the office, and I wanted to know is there as way to have the calls forward to their home office. I was ...

Hello: Occasionally I am getting a ring and dialtone on one extension. In the middle of conversations the user will hear a dialtone and a ring and would go away after couple of rings. The connections between the extension user and the outside party w...

When already on an active call, the phone is unable to toggle between calls. A 2nd arriving call hides the softkeys which were available on the 1st call. You cannot transfer the 1st call before taking the 2nd one since the only option available on th...

Dear All,I have a SPA3102 and I can make phone calls without any problem from my 'Line 1' to PSTN ([96]xxxxxxxx), VoIP numbers which the following format 3xxxxxx, however when I try to make phone calls to an international number through my VoIP provi...

Hifor a demo workshop I try to configure the Webex PhoneConnect App. All settings are made like written in the Webex Phone Connect Admin Guide. But as soon as try to access the webex from the phone the following message is screened:"Cannot connect to...

I'd like to make the extension ring on every call for at least 15 seconds.  To allow a receptionist to answer, respond, place on hold or whatever.To accomodate the high call volume, we have created 5 floating extensions, and added them to both a hunt...

Okay - Looks like I'm going to be the dumb guy on here for awhile.  Hopefully someone else can benefit!  UC540 - connected through EdgeMarc 250 (great box BTW) - to the outside.  Voice is routed through the EdgeMarc registering SIP trunks and all is ...

Hi,We are trying to sell a Cisco SMB telephony solution to one of our customers. For the Main Office we selected the UC540 to handle the IP Telephony.Our problem is that our customer has a branch office with one analog line and he wants to calls from...

Just before ordering a 320W for a new office my Cisco reseller told me that because of dial pattern issues that the 320W has to be configured for all analog lines, or all SIP lines.  It's appearently not possible have both at the same time.I decided ...

Dear community,I recently setup an UC320 system with success, and I glad to use my old PAP2T ATA to extend the number of FXS ports.I saw another discussion herehttps://supportforums.cisco.com/message/3352600#3352600where it seems to be non compatible...

We somehow managed to disable the output of information over the serial connection from our 560. When we recieved our 560, information was output and displayed on our terminal fairly regularly, now we get nothing. Can someone guide me through command...

I recently bought a 3102 box and since I have several PAP2's configured and working great - I had no problem configuring the PSTN line - so when I dial my Sipgate number I get the PSTN dialtone. I did not change anything in the 3102's factory default...

I have two SPA3102s on two separate PSTN lines which are at the same SW and HW level and configured identical  and one of them  refuses to recognize an incoming call if the sender has blocked their CID.  If a CID is send the SPA3102 recognizes the in...