Hi,Here is the premiseLeaf 1 sends a route type 2 update with standard community to leaf 2 (border leaf) and then this /32 is redistributed into ipv4 vrf and advertised outside of EVPN fabric. The issue is with standard community, it's being stripped...
In a secure environment, no internet access from the switch, just for context. Also unable to copy/paste anything from that environment onto a machine with internet access. With that out of the way..NX-OS 9.3(7a)Every 2 hours, I am seeing this log en...
Hello everyone,Can someone please provide a list of Nexus switches that support ESI Multihoming (1&4 evpn routes) for LACP?We have 9318yc-fx and it's not supported on our platform.Thanks!
Hello,I have some nexus 93180lc-ex switches and while looking to upgrade to nxos 10 I found out that these switches are not supporting the 10.x version. Is there a specific reason not supporting this version? Hardware wise are the same with the 93180...
Hi,I have updated one Nexus 92348GC-X Switch to version 10.3.4a.I was hoping I can use the "configuration dual-stage" mode after the upgrade.But - when I type "configuration dual-stage" from execution mode, I getting this message -"command supported ...
Hi, I have a traffic analyzer service and I need to mirror a specific vlan's traffic to the interface that my analyzer is connected to.VXLAN-EVPN is employed in data center network.I have 4 leafs and the mentioned vlan exists on all leafs.Traffic ana...
I am planning to upgrade my C93180YC-FX3 switch from version 9.3.8 to 10.3.3. but during the upgrade process I get the message "Return code 0x40450037 (Not a valid nxos image)". I have confirmed that the nxos64-cs.10.3.3.F.bin file md5 is correct. At...
Can you provide what should be the normal temp sensor threshold for cisco nexus 9000 N9K-C983180YC-EX? Thank You. Is the sugarbowl CurrentTemp ok? because 58 degree celcius is equivalent to 136 degree farenheit Temperature:---------------------------...
Hi,We are doing eap-tls 802.1x with Nexus 92348GC-X switch. But the switch disacrds the eap packets locally as soon as the client send the eap identity packet. The switch just acts locally - it just do not like the eap identity packet from client and...
Hello everyone,When you redistribute hmm into ipv4, these routes are advertised to other leaf switches, resulting in two routes installed in their respective ip-vrf. Something like this:BGP routing table entry for 192.168.10.11/32, version 6Paths: (2...
Dear all, I tihink currently the EoS of N9K-C93180YC-FX is related to the following URL. https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/nexus-c93180yc-fx-c93108tc-fx-fixed-switches-eol.html It can be migrating t...
HelloI am having a problem.400G to 400G Passive DAC100GBase-CR2 Passive DACBoth of the above 2 DACs work on my N9K-93600CD-GX.But QSFPDD 400G to 4x QSFP56 100G (100GBase-CR2), branch cable, is not working, I tried various Breakout configurations.Has ...
Hello everyone, We have two 400G links flapping and I am trying to find a reason why. I am trying to understand the meaning of "show pie eventdb link-down-rca detail" report. What the report says is: Reason: Software Bug. Laser is not enabled. Link...
The switch model: Cisco Nexus 90108TC-EX ver 9.3(13)We are trying to restrict incoming traffic locally to the above switch.The switch acts as a router for a number of interfaces so there are public ip addresses defined, both ipv4 and ipv6 including o...
hi,i have this question. on my network i have all switches aruba cx6300 and a pair of nexus 3064pq (FW 7.0.3) connected on vpc.now on all aruba switch the spanning tree is configured as MSTP and on nexus rstp.So i'm in doubt if change on nexus the s...
