Hi Guys, Is there any limitation on number of active data interfaces (port adaptors) you can configure on Nexus 9Kv (nexus9300v.9.3.7 + ESX 6.7)? My understanding Default profile allows you to configure up to 6 interfaces including management port0....
Forum Posts
Hello, Switch100 is two 9300 stack, and SW10 and SW20 single switch 9300. Three switches connect each other with two cables. show cdp neighbor shows the connection like below, which looks like unreasonable. Did I miss some something in these checks? ...
Hello,I have just tried to configure a vlan interface (SVI) on a VLAN arriving through a layer 2 Vxlan on a laboratory device N9K-C9396PX. The purpose is to use that VLAN interface in order to manage the device itself (snmp/telnet/ssh etc.) but I can...
Why some vlan info are not listed such as vlan name when show running-config in cisco switch? but sometimes vlan names are listed. It looks like it related with vlan number. Anyone can explain it?
Does Cisco offer lifetime hardware warranty on the lower end Nexus switches 5596 or just a standard 1-year manufacture warranty? There are some conflicting information on Warranty Finder. It shows 90 days hardware warranty which doesn't sound right...
HI Guys,I have a switch Nexus 3064PQ stuck at bios. *(c) Copyright 2011, Cisco Systems.N3000 BIOS v.1.7.0, Mon 10/14M Unable to boot past this.Anyone has already idea what's wrong with this? Thanks in advance!
Hi, we are experiencing issues in our iSCSI environment and i got asked if we can monitor the iSCSI IO/s on the Nexus 5k interfaces.I looked at the interface counters but could not find a fitting counter. Have i overlooked something or is there a oth...
Resolved! Nexus 5K
HiI have been tasked with uploading via tftp new images to our Nexus 5k devices ready for the upgrade process, do I use the same commands that I would when uploading via tftp to a catalyst switch.? Thanks
We have intersite link between two pairs of Cisco Nexus 5672 in our DC. We need your guidance to confirm is it possible to apply netflow and export it to solarwinds on that layer2 link so that we can see what data is traversing on this layer 2 link a...
Resolved! Connecting NX-56128P to C2300(FEX) through QSFP Breakouts(40g QSFP-SR4 to SFP+10G-SR, MTP cable)
Can I connect the FEX(QSFP port) to NX-5600 with a breakout cable?and if yes, does it matter what polarity(A, B or C) the cable is as long as I don't use patch panels in the middle?I ordered Polarity B it hasn't arrived yet!and the reason is because ...
Hi Guys, For archive configuration feature, is it possible to change the vrf management by another vrf ? The TFTP and FTP for this feature use VRF management. I have to use this feature but with another vrf for working. Regards.
benefits of Enhanced VPC Dual Home of 5Ks and 2Ks includes redundancy and port channel across the FEXes, but I have a question specifically on the bandwidth speed... if you look at this topology, which all the black links are 40Gb/s QSFP-SR4is the sp...
Hey all,can you tell me the temperature dnmp oid on Nexus 9348, 93180 and 9336?I would like to get the values for command "show env temp".I did a snmpwalk but canniot find the values. Thank you in advance,
Hello,I have two Nexuses 9300 connected together in VPC domain.I need to replace one of the N9K.Is such procedure somewhere? I've tried to fond but I found only procedures for Nexus 7000 and Nexus 5000.
Resolved! 93180YC-EX - ISSU with FEX
Hi - i have a VPC pair of 93180YC-EX (operating in NXOS mode) that I would like to ISSU upgrade. I found this document; https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/b_Cisco_Nexus_9000_Series_NX-OS_Software...
