Hi,I want to upgrade nxos.7.0.3.14 to nxos.9.3.7.The upgrade path nxos.7.0.3.14 ,7.0.3.I7.9 and finally nxos.9.3.7 So my question do I need to copy the os to both SUP before upgrading ? Second question if i copy both 7.0.3.I7.9 and nxos.9.3.7 to...
Hi,before shutting down all the interface was workingonce shutdown and started cisco Nexus9000 C9508 does not show iany physical nterface sh int status does not list any physical interfacesShow module 1 does not show any interface as if there...
Hi All, We have 2 sites in the UK Site A & Site B which are connected with 5 & 7ks using fabricpath and OTV. In each site we have a FW and we are looking to build the heartbeat config. We are not extending the heartbeat vlan over the OTV to the other...
Dear All, Our requirement is to use N9K-C9332C switches in VPC config in normal Nexus OS Mode and will basically work in L2 mode with normal HSRP feature on top of it.. Will i still be required the license C1E1TN9300XF-3Y ( Data Center Networking Ess...
Hello,There are a couple of switches in the 9300 and 9200 series which use the UCSC-PSU-930WDC power supply - for example 9396px, 9372px, 92160YC and so on.Having in mind the UCSC-PSU-930WDC is end of life, I have checked the replacement product advi...
HI, I have to prepare a set of Nexus 9k Switches for a VxRail deployment.Can you guys guide me on what basic things we have to take care?As per the information I have Dell & EMC teams there shouldn't be any VPC or port-channels. Also their requiremen...
I've been struggling to find a clean comparison between these two switch models, I suspect that the OR model does not support 10G-baseT but I haven't been able to find a data sheet to confirm. Anybody know what the OR designation represents (limited...
I am looking for the battery information required for shipping a Cisco 9500 switch. If it contains a battery, I need to know the type (Lithium rechargeable or non-rechargeable, NiMh, Wet, NiCd, Alkaline or Button Cell).
Greetings,So we have two Nexus 7009 that are brand new and should go to production soon. We updated them to the version 8.4.2 and we have now noticed that we are receiving this alarm on both devices Nexus01:2021 Apr 26 23:59:29 GUA-N7K-ADM1 %SYSMGR-S...
Cisco has a Nexus 9000 model which supports FC. But all ports are QSFP, how can we connect FC to QSFP?Model: Cisco Nexus 9336C-FX2-E SwitchPort: 36 x 40/100-Gbps QSFP28 portsDescriptions: The Cisco Nexus 9336C-FX2-E Switch (Figure 2) is a 1RU switch ...
Hi,I am new to the world of Nexus and looking to upgrade a couple of Nexus 7700 pairs. CURRENTkickstart: n7700-s2-kickstart.7.3.3.D1.1.bisystem: n7700-s2-dk9.7.3.3.D1.1.binNEW VERSIONn7700-s2-kickstart.7.3.4.D1.1.bin - KICKSTARTn7700-s2-dk9.7.3.5.D1....
Hello all,I have a quick question regarding BGP routing protocol. In our DataCenter we have Nexus7710 version 8.3(2), with N77-F348XP-23 line cards, and we are currently running OSPF. We would like to enable the BGP feature, in order to create BGP pe...
Hi all, We are faced into a trouble.We have a pair of 7710 nexus, software 8.4.3 connected with VPCAnd there is a lot of multicast in our network, only L2, without PIM.IGMP querier is one of the switches.After down\up of one of the links wee see that...
When I am configuring SNMP on Nexus I am getting the below error. localized auth key should start with 0x[Hex Digits]snmp-server user <username> network-admin auth md5 <password> localizedkey. Can anyone share the working SNMP v3 configuration for Ne...
We are running 3.2 and seeing some strange forwarding that appears to be triggered from an external device sending ICMP redirect messages. What does ACI do with ICMP Redirect messages? Does it adjust the Coop or Endpoint forwarding as a reaction to ...
