Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Looking for some direction!New Fax Server setup with a SIP trunk on CUCM 9.1 w/ SIP trunk to Level3 SIP providerOutbound is setup and working when we test from the Server and call out.Can someone give some direction on how to direct the inbound fax c...
Hello, Is possible to show permanently the Hunt group member status on 8841 phones? Thank you.
Hi , Anyone here successfully setup paging on BE6000 (CUCM ) ?? I have been informed that a third party software "single wire informa cast" need to be installed on VMWare , and will be supported only on version 7.0 and above . Surprised that basic ...
Hi, I have CUCM 10.5 with CUC 10.5There is a big issue with call back invitation messageWhen Phone A call Phone B . No answer duration set to 24 seconds. After 18 with no answer, a callback window appear on phone A saying that " the called party didn...
Hi I am using a Applianx gateway to interface a CUCM and a Nortel Meridian PBX. My issue is that I need to keep calls ringing for at-least 30 mins, if no one answers the call.Because of the RNA timer in the Line group we can only go up to 180 seconds...
Hi, I had a lab publisher die on me and of course I did not have any backups. I have read the article on restoring a publisher from a subscriber, but the DRF Local service on the subscriber will not let me add a backup location to it (it is greyed o...
hi i have two phones, in two regions in different device pools under same cluster..... but one phone not able to hear moh what will be the possible reasons for that???
Hi, i try to configure for our company a service-desk hotline as huntgroup. This works fine with random call routing.Now, i want to configure a "process time" for the hunt group members.Example (3 Users in hunt group)first member is callingsecond mem...
The 9971 which has two DN's is randomly auto dialing from the 2nd DN. It always dials the speeddial. Nothing that I know of triggers it. I notice that the highlighting on the phone randomly highlights the different DN's and then occasionally dials...
I'm having a difficult time getting a 7975 up and running with a 7916 (CM System version: 8.5.1.11900-21). The 7916 does not appear to be powering up at all.When I view the 7975's web interface, there is nothing listed in the Expansion Module fields ...
Hi team,Is it possible to have the following LDAP server type setup at the same time in the CUCM 10.5.1:- Microsoft Active Directory- Open LDAP Thanks
i need to upgrade cme 8.6 on 2911 router ( 512 ram / 256 flash ) to cme 10.5 to support cp-78xx what is the required ios needed and what is the cme configuration file needed to be uploaded to the new cme help with steps if you please
Hi I have a BE6k which came preconfigured with the SIP trunk, voicemail profile, route pattern on the CUCM and on the CUC it had the voicemail ports, phone system and SIP configuration. I don't see the trunk however in CUC. I am wondering what I have...
Hi,It's my first time installing IP Telephony, I installed a Cisco 2921 with CME 10 and SCCP and SIP phones. I make a call to an extension in another branch (with a CUCM) and try to make a conference with the Confrn button available, prompted to inse...
Hi GuysWe have a client using Jabber for voice with mobile clients (androi, OS, Windows) and he has no licenses. Then, now he want to activate Jabber for Everyone. I have the follow doubt: For enable Jabber for Everyone I have to install a cop file i...
