Good day! I need to find out the command for checking or configiring ringback tone at IOS 15.1. There is SIP trunk between the router and SIP Provider at my office. The phone register at this router(CME). I face the issue. I don't often hear a ri...
I have a 2921 running CME IOS 15.4. I am trying to TFTP to 2921 and it fails. I can TFTP to a 2960.I am using 3com and Solarwinds neither will work with 2921 both work 2960.Anyone have any ideas? I am lost on this. FTP fails as well
I know that this was not possible several versions ago but have not checked since then so I'm hoping they've come up with some method in the last few years. I need the user to show up as an end user through LDAP integration but I do not want them to...
Hi Guys,I've been stuck with this for the last 2 days, and I thought to try and use Cisco's forum, I setup my home DC, and started having problems once I moved a Cisco 5505 behind a Cisco 1841 router, I was no longer able to ping some devices, then ...
Hi everyone. I need an CUCM ver 9.12 and gateway SRST with IOS :c2900-universalk9-mz.SPA.154-1.T1.bin". but the IP phones model 8831 (cmterm-8831-sip.9-3-3-5.cop.sgn) not registering when the router SRST is active. The other SIP phones 69XX if are re...
Hi all can someone help me out with digit manipulation i have 5 extensions numbers that al start with 7XXXX ( al different numbers )What i would like to realize is that when one of those extensions make calls out the number presentation wil change...
Hi I am new to voip. My service provider reported that traffic to a specific number from my CUCM is suspicious and asked to validate.What is the way to identify the caller (i have the called number provided by my provider) ? CUCM MCS 7835I3 & version...
Hello,I have 1 DR site and I have configured to access them from HO by pressing 8 access code and the 4 digit extension, everything is working fine. I have a problem for corporate directories which on phone displays users full number 12345678 when a...
Hi
* when i import user from ldap i can see in the end user it's email address - this is fine .
* when i connected to my ccmuser and i can see all my users i'm looking the option to see from there the email address . Can i do that ?
Guys,Have come accross a weird problem. Jabber 9.7, call manager 9.1. User James John has extension 1234. User Joe Bloggs has an extension 5678 and a remote destination configured of their mobile number, 907824 123 456 for example. This is for sin...
Hi,I'm trying to apply the same caller-id for all calls coming from my itsp provider.Current Senario:CUCM --> SIP-Trunk --> CUBE ---> ITSP Alls incoming calls coming from the ITSP dont have a caller-id. I'm trying to use sip normalization in the gat...
Hello,I am a bit disappointed, that such expensive phones are not capable of correct auto-answer.We are using 79xx phones in SIP mode and I know that it is possible to set auto-answer on these phones, but this option will auto answer all calls on par...
Hi everyone,I have question i have cucm 8.5 and integrated with cisco unity connection 9 and i am attempting to create an auto-attendant where a caller will dial a DID and be greeted with a message and then given the option to press 0 for operati...
Hello Experts,I have a requirement from my customer and i need your suggestion to achieve this on CUCM 9.X version. I have a hunt pilot on that there are 3 extensions grouped. Hunt Pilot - 1000Extn 1 - 1001, Extn 2 - 1002 and Extn 3 - 1003.They are a...
