I wanted to know if a SIP trunk from an inbound perspective for call flow can utilize local route groups based on the inbound css and device pool assigned to the trunk? So if the inbound css has it matching a route pattern which has as its route lis...
hi I have configured the quality of service onrouter 2900 on an interface an output g0 / 0 towards the testider and then I configured the g0 / 1 always an output towards the internal network, but since I have sub interfaces g0 / 1.2 up to g0 / 1.5 an...
Hi In configuring route list in CUCM, I notice we need to configure "standard local route group" I search info of it and I got the blow info. Usually the chain is route pattern --- route list --- route group --- gateway. I cannot understand why we u...
Hi everyone, I have a incident with a Cisco IP Phone 7821. Actuallity the device do not receive any call. I review from Cisco Call Manager Express and didn't found enable the option DnD (Do not Disturb) this feature is not enable from CME. From the C...
I've examined the documentation for CUCM media resource configuration for transcoders and I do not see that Cisco Meeting Server (CMS) is listed. I have configured CMS as an audio conferencing resource, but is it possible to invoke CMS as a transcod...
screen doesnt boots when i connect POE to 8851 only mute button is on What do i do how to troubleshoot?? or how to hard reset if i had to?? how to update frimware of the perticular phone if i
Our company used to sell AT&T small business phone systems. The system we sold AT&T has since stopped supporting and selling the system. The system was IP based, we preferred to use PSTNs over SIPs We already have Cisco firewall and router experienc...
I have a quick question i wanna use BE6K hardware for adding a small size CUCM subscriber in a branch , Main Enterprise CUCM cluster is in different location head office My question here am i forced to use on BE6K a pre defined CUCM costumed for BE6...
When i am having a call in PC connected with the bluetooth to my Jabra Evolve 75 headset, there is an incoming call from Cisco which also linked to the same bluetooth of Jabra headset. And it cut the incoming call automatically.
Both the 8800 MPP/3PCC series XML reference guide and the specific 8800 MPP/3PCC series VPN setup guide (both linked) confirm that 8800 series phones are able to be setup with some sort of VPN connection...The above linked VPN setup guide mentions to...
Hi, I am running CUCM Version 14.0.1.10000-20. Observed that the Bulk Administration tools menu is missing from its GUI (Publisher). The services are active and tried restarting but had no luck. I am able to navigate to the submenu if I explicitly p...
Hi Everyone,I have a request now to complete that is to configure speed dial on Cisco 3905 Phones, but unfortunately I found that 3905 is not supporting Speed dials or Abbreviated Dialing. so can any one suggest me any alternative for meeting the req...
Cisco ISR 4451 or 4351 routers, CME firmware 16.12.05.When the command is issued: show voice register pool <tag>, some registered phones have multiple internal routing entries (dial-peers in the range of 40000) with many different IP addresses in a s...
Hi, is there Cisco 8832 Daisy Chain for APAC version? To be specific for Malaysia? Based on the datasheet Cisco IP Conference Phone 8832 Data Sheet - Cisco, there are Daisy Chain but only for North America, Europe, Australia and New Zealand. Thank y...
Calls dropping when consult transfer from 7821 Firmware 14.0.1.03 to 8851NR Cisco CallManager version 12.0 We are receiving new 7821 phones from Cisco with Firmware 14.0.1.03, when these phones transfer calls to 8851's the call drops. Unfortunately ...
