Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello, Here is our configuration:H323, PRI, CallManager 7.0, IPCC 8.0I need to change the inbound caller ID presented to a specific hunt group from one number and don't see how I can do it in CUCM. Is there a way to do it with an IPCCX script?example...
Hi everyone,Is there a way to configure an option from someones voicemail recording to dial out if 1 is pushed? So if someone records in the voicemail message to dial 1 to connect to a cell number, it will cancel the recording and dial out to that n...
Hi everyone,I have seen an interesting message below, when I log onto the CUCM application web page. Cisco Unified CM AdministrationSystem version: 8.xxxxVMware Installation: 1 vCPU Intel(R) Xeon(R) CPU E5504 @ 2.00GHz, 4096Mbytes RAM. Does it mean ...
Hi,I am suing CIsco ATA connect to cordless phone, I would like to is anyway to do call transfer?Phone normal analog phone I can use flash button to let other end go into on hold status but by using cordless phone, there is no flash button.If any oth...
Hi Guys,I am experiencing a strange problem that I need assistance with.I have a QSIG connection on an H323 gateway that links to a 3rd party CUCM. When I call a phone on their side both parties names display on each phone, however when the 3rd party...
Hi, thanks to Rob (I think) for leading me to this software to pull meesages from Unity v7, I've installed the software and copied2011-05-04-23-05-04_SERVERNAME_CONNECTION_MESSAGES_UNITYMBXDB1_MESSAGESto my local machine and upon running the software...
All all,2 weeks ago i posted the issues i had with CME-SRST... where inbound call fails but out going calls are ok... with no solution i decided to configure normal SRST using call-manager-fallback..Phones register okinternal calls are okin bound cal...
Hi All,I just need a clarification with MGCP redundant host configuration in GW and CCM group configuration in CUCM.SETUP:CCM group series : SUB1, SUB2 and PUB Commands configured in GWccm-manager mgcp MGCPccm-manager config server <IP address>The qu...
What is the recommended way to do this? There is no DMA upgrade to 8.0 from 4.2. So what I am thinking is install 7.1.5 on VM (C200M2) and then import the 4.2 DMA data into 7.1.5, then upgrade the 7.1.5 to 8.0. Does this seem like the correct way to...
hello Guys,when i press my voice mail button, it does not prompt for login.even a call to voice mail, there is no prompt. what could this be ?any help is welcome.thanks in advance
Hi,I can't remember so I want to ask which command is showing us FXO port's idle line voltage? How can I see the line connected or not with FXO interface from CLI.Best regards,David
I copy the default 7937 non secure profile to a new profile named secure 7937 profile and want to add or change some parameters.But theres no button or link to do this. CUCM is a 7.1.3. Is the a special access right to do this? I work with CCM Super...
I have two CUCM connecting with Qsig using H323 across a WANphone1>>>>CUCM1>>>>GWA>>>>>GWB>>>>WAN>>>>>>GWC>>>>>>>>>>GWD>>>>>>>>CUCM2>>>>phone2When calling CUCM1 to CUCM 2- both phones get names on alerting and connecting statesWhen calling from CUCM2...
Hi all,I’m using uccx 8.x for my customers contact center, and every day we are using historical report to collect daily real data from uccx but every collect the data there is problem with time reference. The time report still used GMT time and cann...
Hello Guys, I have a 7961 phone that cannot find a corporate directory. when i click on corporate directory button, i see nothing.i checked in the enterprise parameters settings. the directories URL is pointing to the good IP address.when i check the...
