Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
The topology is like this:GW1(h.323) ----------------------------- HQ(CCM 4.0)GW1 : is at branch 1 and has a local call only (Cisco 2821 Router), located in washington DCHQ : is at main branch and has a long distance call, located in springfield VAI ...
Hello,I have a UC560 running 8.0.2 and I am using CCA 2.2.4 to configure it.I have a few questions regarding Call Blast Groups (CBG) and General Delivery Mailboxes (GDM).1. When we create a GDM for a CBG there doesn't appear to be any MWI option. Is ...
Hi everyone..I have a CCME version 4.2, with ipphones SPA 521G and SPA 524G. When they receive a call the day that appear in the caller id is 6 day early from the original day, but the hour corresponds with the time. We dont have the problem with...
Hi All,I am trying to install Mobility Advantage server 3.1 on MCS-7825-H4, but at the begining of installation it says "can't find device for installtion type" and it prompts me to choose the driver. is mobility advantage compatible with this server...
Hi,i have one cluster v7.1.3 with six servers distributed in two main sites. Main site 1 is having the publisher server and two subscribers and main site 2 is having 3 subscribers. and i have centralized call processing for more than 100 remote branc...
HIWe have a Unity Express system which has been configured and working fine since the installaiton. Voicemail number is 5000 and AA is 5001Last week the voicemail system stopped working - nothing has been changed on the system it just stopped working...
Hello,I have a problem when generating a report for missed calls following the procedure below.ProcedureStep 1 Choose User Reports > Cisco Unified IP Phone.The Cisco Unified IP Phone window displays a list of all Cisco Unified IP Phone services that...
I'm working on a fresh UCM cluster install and the subscriber encountered an error during the install process and refuses to continue. I have rebooted several times. I also tried the installation media and it only brings up a recover program which ...
I have ran into an issue to where I am unable to log into the CCM Admin interface (CCM Version 4.1). When attempting to log in, it just re-prompts me with the user credential screen. I have attempted to reset the Admin password with the CCMPWDCHANG...
I am running CallManager 6.1.3. I have received a few 7931 phones for testing. Is there a way to force an end user to pick a line in order to pull dial tone? In other words I don't want them to get a dial tone just by taking the phone off of the c...
I believe this seems to wait about 10 seconds when I use ! in a route pattern before sending it to my ruote group. I would like to decrease this timer, or adjust it as necessary. I looked through all the configuration settings, and didnt see anythi...
Hi thereI'm currently evaluating different VOIP phones for use. I odered two SPA501G as they offer PoE. However upon connecting the lan port with the switch, I get no connection/boot up of the phones. Neither of them seem to work. I tried three diffe...
What Cisco platform do I need to support SG3 FAX? ATA, VG2xx or FXS?
In Kiev, Ukraine. I have 4 analogue lines connected on a 4 port FXO card. When connected to the Siemens PABX, all lines can call anywhere. When I connect the lines one by one to the same port on the gateway with the same configuration, I have only 1 ...
Hi,we want to upgrade or CUE from 2.3.2 to 7.0, but i seem to be able to only copy from an FTP source. Can I copy the image from the router flash to the AIM module?
