Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello everyone,I had a tech try to flash this phone to SIP 8.11 from SCCP and they must have done something wrong, because the phone goes from configuring VLAN to TFTP error (0A in little letters next to it) and hangs. The tech said they did a restor...
Hi,I need to integrate CUCM 6.0 with Nortel CS1000M for my client. I put an MGCP gateway and configured QSIG trunk beteween CUCM and PBX. The connectivity is like thisCUCM --> MGCP --> QSIG --> PBX Now the calls are working both ways from IP Phones a...
Need to change Subscriber / Call Transfer/ Transfer incoming calls to a phone/ to Yes, ring extension for. Do you know the comparable setting in Unity Bulk Edit ?thanks
Hi,I have CCM cluster 5.1.3 with Cisco IP Phone 7960G, 7961G, 7940G and 7941G. The IP Phone 7960G and 7940G has Firmware 8.0 (7.0). This CCM Cluster has an NTP Server, When the time was changed, Only this one was changed on the cisco phone 7961G and ...
Hi Guys,Is there a way to see " only resolved questions " or "only 5 rated questions" in a particular forum say "Ip Telephony" ?p.s. I am expecting a reply from Rob :)~Neeraj
My organization purchased a Polycom Soundpoint IP 670 SIP phone. I would like to know howto configure this SIP phone on CUCM 7.0 so that I can use it just like any other Cisco IPphone. Any help on this will be greatly appreciated. Thanks.
Hello All,We currently have a Cisco 3825 Router with 3 VIC2-2BRI-NT/TE BRI Cards. Everything is working as it should, but I'm trying to change our dial-out number. With this I mean the number that is displayed on the telephone of the called party. On...
I've joined two clusters together and would like to know if anyone has an answer to a question I have. In a normal call in a single cluster, two phones send the rtp streams to each other until they hang up. If a phone makes an offnet call, the two ...
Hello, can we change the TFTP server address on a cisco 79xx phone remotely? I know we can use the SEP<mac>.cnf file to configure, but can we also change the TFTP address using this file. The problem we have is we are changing the IP of our SBC and i...
I have CCM 7 and Unity 5, I was wondering if there was a way to synchronize the CCM Pin with the unity voicemail password
Hi,Assume the following:A manager initiates a conference with two other persons. Then he tells his secretary to add two other person to the existing conference.Is this possible? I tried to transfer a conference to the manager's phone and then let the...
We are having problem on our 7937. If we make a local call with that phone we can only hear from the other phone. No voice is coming to 7937. But when we make outside calls there is no problem. It is very strange. Any ideas ?Thanks
Hi,I have been really stuck with the UConnection 7.0 installation, as post installation I have been unable to access the UCA (Connection Admin) webpage with the admin username and password I specified at the time of installation.IMHO, I have left no ...
Hi,I'm experiencing some weird behavior with a time period config in CUCMBE 7.1.The administration Guide describes the following example:"Choose a Year on value of Jan and 1 and an until value of Jan and 1to specify January 1st as the only day during...
There are Cisco 2801, 4 FXO ports connect to PSTN, CME configured and connect to H323 VoIP network by Gatekeeper.On Cisco 2801 working VoiceXML application:<?xml version="1.0"?><vxml version="2.0" base="tftp://Ñ….Ñ….Ñ….Ñ…/ivr.vxml"><form id="main"> ...
