IP Telephony and Phones

Hi, I am trying to upgrade a UC520 with the GB language pack but it seems to constantly fail. It works through the various stages up to about stage eight then fails but I cannot see any reason for it. I am unzipping the CUE files into the default app...

plaese to tell me if i will cover building of two floors with 6 wireless access points,does the user that hold Wireless IP Phone face the choise of which Wireless access point to connect for or the wireless access point be transparent and the wireles...

Hi,My customer has CUCM 6.1(2) and Unity 5. They have a bespoke "console" system similar to a dealerboard arrangement that allows them to dispatch calls to parts of their organisation.CUCM is integrated with the "console" via an MGCP-controlled Q.Sig...

Hi,I am forwarding the IPCCX IVR call to CCM(Dummy Phone), which then forwards to unity. 1)Created a CTI route point and then added DN to it 500, used existing voice mail profile(used by IPTEL users with the same setup) OR 1)Created a Phone with Dum...

I have ephone-dn configured in dual-line mode.My users start complaining because when they use a phone and someone else is calling, the calling person doesn't hear busy signal.It is possible to use dual-line mode and setup busy signal when someone el...

Cisco IP Phones identify themselves using DHCP Option 60 - for example a 7940 sends 'Cisco Systems, Inc. IP Phone CP-7940G' in it's DHCP discover/requests. With other DHCP clients using vendor classes allows me to customise the DHCP offer/ACK for sp...

Hi,Does anyone know if you can remove the fastdials menu in the CCMUSer web page?I check all the enterprise parameters but can't seem to get rid of it.Thanksmark

i have two fax machines on the same ATA, they both can receive faxes but they cannot fax out, when i take an analog phone i can make national,cellphone,international calls from the line but i cannot fax out of that line. thanks

Hi,I did a reinstall of the CDR program on callmanager 4.2.3Now when I try to open the callmanager page I get the error: HTTP 500 - Internal server error I have restarted the IIS server but this didn't help.Has anyone seen this before? And how to sol...

Hi All,We have deployed CUCM 6.1 and AA using IVR at our CU. Find below the details,Numbering plan - 513XXXDID range from service provider - 3XXXGateway protocol - MGCPFor incoming calls we have configured translation pattern on CUCM so that 4-digit ...

I have a site in London that has Cisco VOIP running off a 2811. We have a VPN tunnel up and running. I have a 2811 that some else started to config. Is there a link that would show me how to configure the other 2811 correctly. This going to be a tes...

Hi Friends,I have ATA186 device in order to connect FAX with CME. ATA device have SCCP based ios so tell me can i configure fax through SCCP based ATA with CME. I gone through documents available on cisco but i think i have to change ATA software fro...

I ran into this error message while installing the 2003.1.2 HP image on a MCS-7825H3."The installation program has determined that this server model:MCS-7825-H3 is not supported for remote deployment by this os version. Please un-mount any CD-ROM/DV...