Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
hii have this scenario: ccm 6.1, e1 configured as mgcp gateway on 2821 i have a problem that is everytime when the router reboots this command:mgcp call-agent 192.168.1.10 2427 service-type mgcp version 1changes to mgcp call-agent my-router 2427 serv...
Does a H323 gateway support g729 for outbound calls? If it does can I have calls go out both g711 and g729 if needed?
Hi,My customer wants to have many direct calls to their extention (not a continuous range of ext, ex: 201, 322, 422...), with many ANI number (not continous, too). But the translation rule only allow up to 15 subrules, What do I have to do to solve t...
I have setup up a hunt group to be used by the Unity Message Notification to call an CUM 6.1 Hunt group that points to DN's that call diffrent CFA offnet numbers (the support groups cell phones).If i add internal DN's that are attached to devices to ...
I have a 28xx router with FXO ports setup as a h323 gateway with CM6.1. On the gateway i setup a trunk group with the 4fxo ports, and configured a dial peer to use this trunk group. This works under normal situations, and if the first port is in...
Hi guys,A customer is experiencing that while he dials in on-hook status and he is not fast enough, the dialed digits are reseted after a certain time.Is it possible to disable this feature, so that the already dialed digits stay in phone infinite?Gr...
Hi, I have a CUCME7 (12.4(20T)) customer with 7941-G phones that currently load from firmware version SCCP41.8-0-4SR3AS. After upgrading to firware version SCCP41.8-3-3S, the phone will crash, usually just after processing a call. Is it possible th...
Hi all,I recently installed a UC500 for 5 users. The setup has 3 7921 wireless IP phones and 2 analog phones. The setup is such that the main extension is on an analog phone so that if the UC500 is down, calls can still be received from the PSTN. My ...
Hello,I have a 2811 router configured as an H323 with FXO ports going to the PSTN. I also have CallManager 6.1 and I am trying to figure out if there is a way to configure call waiting on the FXO port so that when a user is on the phone and a second...
I am having a strange issue with my CallManager and 2851 Router with a T-1 PRI connection to the PBX. Users can dial into the VOIP network and dial out to the PBX no problem but when they enter voice mail or MeetingPlace and enter digits they are du...
I am looking for the SQL statement that can be used in a query (Query Analyzer) against the CDR database to convert the format from Epoch to MM/DD/YY 00:00:00. I've googled "Unity Epoch time" (as mentioned on one forum posting) and even asked TAC, bu...
Hello,I'm testing mobile voice access, and I noticed that the calling name does not get sent to the H323 gateway for Caller-id purpose. (I did a debug isdn q931 and only saw the caller number.)Can anyone suggest what may be the problem?Thanks,-Dave
Hi all,I got several lines and its possible to call all of them over line group and hunt pilot (one defined number - you call and all phones in group are ringing). And there is problem, I cannot adjust this hunt pilot number to the call picku group. ...
Hi, I have a problem with my SIP trunk to my voice carrier. I have CUCM6 with a SIP trunk to a CUBE and then a SIP trunk from the CUBE to my carrier. When I make a call from an internal phone to a PSTN number I see a SIP INVITE hit the CUBE but the c...
Hi,I have an UC520 with a couple of 521 IP Phones. I configure the UC520, plug the phones to the integrated switch and they don't want to register. The display keeps showing "Registering"... "Initializing Network"... "Downloading SEP<mac>.cnf.xml" .....
