I have a call between an H.323 endpoint and a 7940G phone. When the H.323 endpoint disconnects first, the 7940G gets fast busy tone. Any idea how I can fix this? If this needs additional information for a solution, please let me know.
We have CME 4.0.0, a 7961 with 7914, the 7914 is not taking the load we have in flash, served by tftp and listed in telephony service, the issue is each time we use the 7914 to call an internal extension the screen partially blanks out??
Can anyone help me with the command on our gateway to force a call out a specific voice-port to test if there is connectivity? I hear there was somewhere. End users can not find dead line themself.
On page 7-5 under "Gateway Utilization Reports Configuration" it states "Maximum number of calls that are possible by using the gateway at any time = maximum number of ports for the gateway as configured in the CAR Gateway Configuration window." Can...
I can't access to directory or any feature on 7931 ip phone. Does it need to configure something on CCME before this available. not problem with another ip phone like 7961PBX:CCME 4.17931 Firmware:cmterm-7941_7961-sccp.8-2-2SR1.tarThanks
I have built the One Button Agent Login service and subscribed a test EM agent to it, but I get an error when trying to use it that says: "Error, Invalid Input". If I log the agent in through EM it works fine. If I paste the URL provided by Cisco int...
We have tried to hide users via the following document http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00804d2087.shtml but this doesn't help. It is ridiculous to see AD users in the Call Manager that don't have phones a...
Some employees do not have permanent desks but require DN assigned for each mobility user. These people will use virtual desk (aka host desk) office space.CCM 4.1(3) can you create a user and assign a DN without device configuration?thanks in advance...
We are considering using IPMA, however the single route point is an issue. We could have Manager's DNs (which can't change) which could be anywhere in the XXXX range, but we already have a route pattern for XXXX which routes non-IP destinations towar...
Is there a way to override a call forward all, for example if someone has a DN forwarded to them, they receive a call to that DN, they know that the person is at the desk, and they want to push to call back to them or let them know they are on forwar...
Hi,I have seen a video of Unity Audio Text Manager that shows features (like the "references to this object" windows) that are not available in the version of Audio Text Manager that we use (5.0 build 24). I have checked on the Cisco Unity Tools web ...
We are using Call Manager 6 and we are using Active Directory. We have synced with AD and we have a user which has been deleted. It shows up as inactive in Call Manager and has been this way for 5 days. How do we get it to disappear all together f...
Hello,I'm not able to transfer a call with consultation to an analog phone connected to an ATA.Only way to transfer the call is using blind mode without consultation.I think my 2801 with CME is correctly configurated.I set the telephony-service 'tran...
