IP Telephony and Phones

Hi,i have a request from a client who needs that calls going to mobile phone gets disconnected after two minutes.they have CCM 4.13 and possible to uprgade to find a solution.They have FXO for mobile linesthey have IPCC express 3.5if also a third par...

Rather frustrating this one. I've seen this on two different customer deployments of CME so far. Both are on 2800 routers and in each situation attached to different devices (one customer the port was attached to a fax, one it was attached to a Cisco...

Hello,Decided to recreate this thread because the other one was quite unclear and not very helpful.I got a 7970 here and I just powered it up. At first I thought there was no activity on the screen, but now I can see that stuff is being displayed it'...

Hi, I have handful of Ip phones which register/deregister w/ the ff. logs;Can anyone help me how to attend this issue?06/02/2007 02:01:57.779 CCM|StationInit: TCPPid = [2.100.132.2033317]Socket Broken. DeviceName=VGC15c647a98e15,IPAddr=192.168.0.1...

I have loaded CCM 4.3 with the Windows 2003 Cisco OS... However.. I am unable to connect via RDP. I have enable remote desktop but cannot get a connection. I like ot have RDP working as a backup in case VNC crashes. Ive loaded this OS on 4 boxes n...

Hi AllI could use some help setting up CM with my sip-provider.I've setup sip-ua to connect to and authorise with my sip provider. I have setup my first handset with secondary number (same as username provided by my sip providers) and used the no-reg...

HiConnectivityCCM1---(h323)---HQRTR/IPIPGW----(H323)---CME(Branch2)Scenario 1:CME phones can call into CCM1 phones.Scenario 2: (Problem)CCM1 IP phones not able to dial into CME IP Phones. When CCM1 phones call into CME phones, CME phones will ring, h...

I am currently running os 2000.4.3a on a publisher and two subscibers in my cluster. I recently purchased a mc7845-h2and it came with os 2000.4.4 and i plan to add it to the clusterwill it have some compatibility issuessince the other servers have a ...

hi alli have CCM 5.1b, and i configured IPMA, every thing is ok except one thing which is the Filtering displays as Down, I checked the CTI route point its status is unknown and not registered, i restarted it but still not registered, i tried to rest...

Hi all,I experienced that ATA-186 was not able to send *, so some dial plans I arranged could not be used by ATA-186. Is there a way ?Regards.

Why can't I select the CISCO CAMERA MICROPHONE as the microphone for IP Communicator.This is the 2nd version of softphone I have tried from Cisco and it is just too limited to be fully functional as my only phone.If there is some thing I am missing h...

Hi,Is it possible for users to set up speed dials on phones where we have assigned the DDI number to the DN instead of setting up extension mobility?

A VG248 was replaced and nothing was done to the CallManager. When the new VG248 came up, it registered with the CallManger with the previous MAC address. All of the phones and FAXes are working on the new VG248. Can I leave it this way, will it c...

Hi All,It is possible to have some users in the CCM Cluster to permanently mask their number for outbound calls and how?Thanks a lot in advance.Regards,Maddox