Hi, I have a switch CATALYST 2960-X SERIES that was not working. I had to replace this switch with another cisco. I tried to reset the switch 2960-X to factory configuration, witch my computer connected to console port, but there was a message tellin...
Forum Posts
Dear All, we've Cisco core switch and wanted to limit ssh access to specific SVI interface, at the moment we've a standard ACL configured for limiting source addresses who can access core switch through ssh, in addition to that we wanted only one o...
I cant get the command login authentication default to apply it does not show up in the running config for what ever reason even though i went to both the console and vty line and applied the commandsCurrent configuration : 7078 bytesLast configurati...
Dear Sir ,RP/0/RSP0/CPU0:Jun 1 11:16:30.228 BDT: lrd[332]: Failed to convert nodeid to pq nodeid ''Subsystem(1597)' detected the 'fatal' condition 'Code(4)': Invalid argument'RP/0/RSP0/CPU0:Jun 1 11:16:30.228 BDT: lrd[332]: Failed to convert nodeid t...
Currently, I have 2 devices running on Windows Server 2003 with same name and are connected to the same Cisco Switch. We call them device A and B, for now.It gives out warning; duplicate name on network.How do I resolve this other than changing the c...
Hi All, Is there any way that can be add all devices on Live Stream Syslogs like on Historic Syslogs tab? is there any license needed or level to make the live stream syslogs all devices will be added? currently in Live Stream Syslogs only 10 devices...
Hello, We need 64-bit counters (ifHCInOctets / ifHCOutOctets) for virtual-access (PPPoE) interfaces. We would like to use this to store historical subscriber traffic-rates for at least a week. We did some tests and it seems that the device only keeps...
Firewall: ASA5505Issue: HTTP request from outside is failingLog from ASDM-1: DENY TCP (no connection) from IP_address/port to IP_address/port flags tcp_flags on interface interface_ameLog from ASDM-2: The ASA discarded a TCP packet that has no associ...
Good Day all, I have a requirement to ensure syslog traffic is securely transmitted to/and from PI. I ran the show security-status command from the CLI and obtained the following results. I see that TLS v1.2 is running but unable to confirm or see...
Hi, I have a problem on the cisco Cisco IOS XR Software, Version 7.1.15 I don't understand if there is a maximum configuration limit of the VRF on the same device
Hello Community I want to take a copy of iso switch-1 and upgrade switch-2 with switch-1 iso to be with the same iso I already installed Putty for console connection and tftpd64 how can I do it without making change in configuration?
I was wondering what are the default exceed and violate settings on a Cisco Router if they are not explicitly specified? Example: policy-map Test class Test police 80000 conform-action transmitIn the above, there is no exceed or violate option specif...
Hello, Please, I'm searching for how to check EPNM Current NBI Connection? Also what is the maximum number of EPNM NBI Connection?Thanks
Hello tech gods. Our 38 leaf switches each need an essential license.We have 38 "DCN Essential for 10G+ Leaf XF" licenses" However, our "Smart Software Manager On-Prem" server indicates that there are 418 consumed while we actually only use 38. (see ...
Hi Everyone,I have an issue with SolarWinds sensor device Cisco ASR-9901 Power Supply Input and Output current value, can anyone tell me about the Cisco ASR-9901 Power Supply Input and Output Current (A) threshold.Here is the capture Power Supply sta...
