Network Management

CNA Slow

Hey Everyone,I have the latest version of CNA installed. However, I a finding it very slow as it takes ages to discover and process everything. Does anyone have any suggestions or know the best way to troubleshoot this slowness?I only have 1 Cluster ...

CiscoWorks DFM - Operationally Down events

Hi,We use CiscoWorks LAN Managment Suite. (LMS 2.6, DFM 2.0.10) to manage our network infrastructure.After configuring DFM I'm receiving many operationallyDown events from DFM although I'm sure the vlan is up&running.The event description contains in...

can't get firewall sysloging to work

I am running a Linux syslog server (called syslog-ng) and I point the firewall to send all its syslog messages to that server. I believe that I don't have the correct syslog level configured on the firwall, because the syslog server is picking up al...

AAA admin access to switches - max # of Radius servers?

When configuring a 3750 or 6500 (both IOS) to allow AAA admin authentication via SSH/Telnet and Console, is there a max number of Radius servers that can be defined for authentication?I ask because on a Cisco wireless AP, you can only configure 3 Rad...

IPM error 105

I am at the customer site and we are now trying to simulate the real upgrade of Ciscoworks on a Virtual machine.The installation halts at 33 % with an IPM error 105 - see attached I am also attaching the install log The installation exits at this s...

Resolved! How does RME 3.5 support configuration baselining?

I am slightly at a loss as to the exact support for config baselining in SNMS 1.5 + RME 3.5.- Is it possible to define a template and compare active device configurations to that template?- Is it possible to generate a template based on a current dev...

Resolved! LMS 2.6: Long-running ChangeAuditDefaultPurge job

I've been trying to find out why my LMS 2.6 backups are getting bigger by several hundred MBs a day again. I've known /var/adm/CSCOpx/files/rme/dcma/difffiles/ is the one doing the growing, but I finally find this is because the daily ChangeAuditDefa...

Archive purge not working

LMS - 2.6RME - 4.0.6A brief of logs under rme\jobs\ArchivePurge\1066.x'(log files: log and log.1-4)PURGE SETTINGS: ByVersion = true ByAge = false PurgeLabelledFiles = falsenumber_of_versions 7info-> handleMultiDeviceExecution,149,Completed executeJo...

Problem with LMS 3.0 on windows

Hi We are running LMS 3.0 with the latest dDecember patches. I am getting the following errors avery 10 seconds in windows event application event viewer. Does anyone know why this is and how o fix?The description for Event ID ( 16640 ) in Source ( I...

Not opening Device center in LMS 2.5

When PIX 535 is added to LMS ,it generates *.dbf files .due to this more hard disk space is utilised .Now there is only 200 mb space is remaining on Hard disk.Removing PIX 535 from LMS is one option then how to delete those *.dbf file to create more ...

LMS 3 on VM-ware

Did anyone try to upgrade Ciscoworks 2.6 to ver 3.0 on VM-ware? I tried it with dummy data and it worked fine, but with a copy of the actual ciscoworks server (with 6Gb of data) it is giving errors during the intsallation. I noticed that the document...

Resolved! Call Manager 5.0

Hi, I have been trying to backup the Call Manager with SFTP, I have tried several different SFTP server but none of them seem to work. The logs show that the Call manager is connecting but then it is disconnected. Does anyone have a good SFTP that ba...

CUOM 2.0.1 Device names and IPs

Hi all:I have CUOM 2.0.1 managing 3 CCM clusters. I've added the devices in DCR the fields like this:Display name: CCM-PUBHostname: CCM-PUBDomain: mydomain.netIP address: 10.1.1.1But in Operations Manager it only appears with the IP address and not t...

6504E : CiscoView Device Manager / Embedded CiscoView possible ?

Dear all,we have a Catalyst 6504E (from the ACE20 4G 6504E Bundle with Sup720-3B), which we want to manage using the web interface. Unfortunately we don't get "CiscoView Device Manager" and "Embedded CiscoView" running. We do know that the 6504 is no...