The picture above is a picture of the N9K power supply.I have noticed that the blue LED is on.I tried to find the relevant content, but couldn't find it.What does the blue light on the N9K power supply mean?
Forum Posts
Cisco 2960X I am facing problem-related to voice VLAN. It's up down frequently but data VLAN is working fine.Kindly find attach notepad for better help.
I'm not sure if I'm overthinking this but I'm not sure where to make the ACL for the following purpose... We have a WiFi controller bridging VLANS directly into a Nexus switch, there has been SNMP traffic going to VLAN 5 from 50 but I only want VLANS...
Hi experts, I'm trying to find whether N3548 is able to configure SHA-256 hashed password. The device is currently running on NX-OS 6.x, and it's pretty clear that NX-OS 6.x only supports MD5 hash. I tried to search for release notes for later releas...
Please help to get OID for “Show process memory” command in 2950 switch.
Hello Team,Over the weekend I ran into the issue with Legacy IOS devices (in my home environment) and using a MAC to try to attempt to SSH into the legacy device. Getting SHA1 errors, "Unable to negotiate with x.x.x.x port 22: no matching key exchang...
Resolved! Changing Vlan of a running network
Dear Experts, I have a network, which is spread across multiple areas, all connected to a central location. Individual area have their dedicated L2 Switch and connected to the central L2 Switch. Making all nodes accessible from central location. All...
Why would an individual meeting within a recurring series have a completely different access code? Same meeting, but if I click on the series I see a different access code than if I click on "just this one"
Hello everyone,I'd like to enable logging on some catalyst 3650 and save all the logs to a network area, like a nas or something.I understand that it would be ideal to have a syslog server, but unfortunately that is not possible at the moment.Can thi...
I am currently in the process of trying to upgrade the IOS of a ISR 4331 currently running the following:Cisco IOS XE Software, Version 03.13.04.S - Extended Support ReleaseCisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 1...
Hello guys, I'm doing some studies on Loop Guard, BPDU Guard, BPDU Filter and Root Guard. I want to confirm with you if I understood all the functions correctly, below an explanation of each one: Loop Guard: active on root ports and in a block state,...
We have a team of L1 people who currently have privilege level 5 access to our network devices. Apparently they don't have access to all the 'show' commands. Commands like 'show logging' is very basic for basic checks, which they don't have. I'm look...
For an IDS Design we would like to configure multiple RSPAN session which is working fine for some other Cisco Products like IE-4010-4S24P, WS-C3750-48TS, IE-3000-8TC…unfortunately we struggling to enable this on our IE-3300-8P2S devices using ie3x00...
Resolved! Cisco 3750 48PS for home use
Hi All,Very new to switch configuration. Picked up a refurbished 3750-48PS that I want to use in my home network. Yes, I will have a bunch of ports throughout the house. Can you point me to a resource on setting this up? I am fairly familiar with...
Recognize Your Peers
.jpg "VIP Mentor"){kind=icon}
