Network Management

Hello everybody!I've 2 questions related to above topic:1.) how do I get the vrf information for a route beeing changed.2.) how do I track all routes in the routing table. including default-route The following command: event routing network 0.0.0.0/0...

I've got an error message here while trying to open the rmeng database -*** Error ***Could not connect to database: Database server not found (DBD: login failed)I am using LMS 3.2 , RME 4.3. Need help on troubleshooting the error.

I'm running 12.2(33)SXJ1 on a 6500 with several IPv6 BGP peers. Is there any way to monitor the BGP status of IPv6 peers? I've been through the BGP4 mib and cant seem find a way to check the status of IPv6 peers. Does anyone have any thoughts on this...

Hi,Would like some help with the following error message:SNMP:             bash-3.00$ /usr/sfw/bin/snmpwalk -v2c -c <community-string> 172.17.6.224SNMPv2-SMI::mib-2 = No more variables left in this MIB View (It is past the end of the MIB tree)bash-3....

Hello,I have grouped some IE 3000 switches which are not updated automatically when new devices are added. Here are the rules used:Device.Image.Version equals "12.2(55)SE3" ANDDevice.Chassis.Model_Name equals "IE-3000-4TC"  Membership Update Automati...

Hello all,My job descritpion is network administrator/engineer. But for years I have been in charge of CW and now LMS 4.1. Since I am not a system engineer in profession, it has always been difficult for me to understand how to keep databases and log...

Dear FriendsI wish you are in very good health ........ I really very confused regarding LMS and i really needs your help ........ I need to order LMS for one of our customer with 500 devices and reporting cabailities ..... So i chosse base license "...

Hello,I am trying to connect to a PIX 501 firewall via serial connection. My problem is that I cannot issue commands to the firewall. Whenever I try to type something into the terminal, nothing happens. I have the connection settings configured prope...

Hi,We are trying to find where is the limit of file archived of device configuration but We didn´t find it. We need to kwow where is the limit. Can Somebody tell us where we can see this parameters?Thanks.

Hi all,When I open the topology services of my LMS, I see an overview of my network layout. In LMS I can choose several layout templates "Circular, Hierarchical, Symmetric, Orthogonal.When I choose to do my own network layout, I can move the devices ...

In order to complete the upgrade the LMS 3.x runs over a physical server that ends with the upgrade(server its gona be retired), the think is that the Cisco Prime comes with an UCS and its gona run over a VM. The question here is the "Cisco Prime Inf...