First I assume you have to use Dialpeers with CCME, there is no easier way to handle this?Second what is the best way to block 1900 calls and such... Do I just create a Dialpeer with no port?
First I assume you have to use Dialpeers with CCME, there is no easier way to handle this?Second what is the best way to block 1900 calls and such... Do I just create a Dialpeer with no port?
The following are excerpted from http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12120ea2/3550scg/swqos.htm#wp1042819. Does that mean mls qos trust DSCP is uselss on a layer 2 port?ThanksBy using the mls qos trust cos interface configuratio...
I have very little experience with the mc3810 product, but a customer has a couple and needs help. I have several questions, and cannot seem to find any strong documentation on the Cisco website.I need to support 12 channels of g.729 on each box wit...
On a CCM v4.0 site where there are many users with shared ine appearances ( not using IPMA)- is there a way to either:1- Only register the quantity of missed calls on the display of the phone for the users primary lineor2- Remove the display that sho...
Hello,From the show gatekeeper endpoints that I give on a cisco 3640 I see that there were 175 endpoints register in that router, can any one tell me what is the max number of endpoints supported in a 3640 or thus have to do with the ios.Thanks
Anyone have any experience with reflashing a Catalyst 4224. A software upgrade went bad, and the ethernet ports no longer work, not even in rommon mode. Can you do it through a serial cable with xmodem? The regular xmodem command doesn't work. Thanks
hi allsituation: a call comes from the pstn to an ip phone, this ip phone forward all calls back to another pstn-number outside.in this case we have quality problems.our gateway is an 1760 with enough dsp´s and ios 12.3.11T2.have you any helpful debu...
I have a customer running CME 3.2 with three FXO ports plared to the receptionist. Some calls show in the phone's call history as "From 911". Since we also have dial peers for outbound access, including to 911, I'm thinking this is coming off one ...
Hi,I've got a voip setup using an AS5300 and a VM (Voice Master) gatekeeper/radius server.The AS5300 has 2 E1 lines, one incomming and one outgoing. Also it as a IP line for Internet access.VM <-> AS5300 <-> PSTN, InternetAS5300:E1-> to PSTN<- E1 to...
Is it possible to determine if there is phone/fax connected to a port on VG224 via SNMP ?
hi,I need to implement an ISDN PRI DID service at my HO. Now the local central office ( CO ) is forwarding the last 3 digits i.e 230 of the 8 digits ( 24709 - 230 ) , an outside PSTN user dials to an internal user.My existing internal extensions are ...
I'm testing a CSPS v2.0 server on RED HAT7.3 with 2 Grandstream HT286. The problem is when I can ring from one device to another, the server does not acknolidge the device answer, so I can't have a conversation between. The first device send the ...
I've just inherited a Unity/CM 3.3(4) system to maintain for the next couple of weeks.There's one thing I want to do, which I thought would be straight forward, but without success. One user is on holiday, so I want to disable his voicemail and leave...
Hi Guys,Just wondering if anyone has an active link to the CCM support patches notification website ? (ie, subscribe and get email notifications when patches for CCM are released)Previously, I had this one: (now dead)http://www.cisco.com/warp/public...
Help Appreciated,For POC and self learning, is it possible to install ccm and unity in the same box? I know it's possible to install ccm on a non-approve hardware box, how about for cisco unity? Can anyone guide me for this installation and so forth?...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-09-2024 04:24 AM | ||
06-28-2024 07:36 AM | ||
06-20-2024 05:44 PM | ||
06-17-2024 07:18 AM | ||
06-02-2024 01:59 AM |