Other Collaboration Subjects

I got two brand new MCS-7825H-3.0-ECS1 servers (3.04 GHz CPU, 512 MB RAM) from Cisco and neither one recognizes the hard disks. They start initializing the Array but then they fail to detect the hard disks.Everything is correctly plugged...Can it be ...

Hi AllI own a Cisco 827-4v connected to Telecom Italia dsl networkIt works this way:interface Ethernet0ip address a.b.c.d 255.255.255.248interface ATM0no ip addressno atm ilmi-keepalivedsl operating-mode autointerface ATM0.1 point-to-pointip address ...

I am looking into the possibility of using a Long Distance VOIP Provider such as Vonage, or BroadVoice to eliminate per minute fees on outbound calls from our IP Phone and/or legacy PBX. What I would like to know is has anyone done this using a Cisc...

Can anyone from Cisco confirm if this bug CSCeb86095 is fixed in CER version 1.2.2, please ?? The bug toolkit doesn't provide this information for this bug. Thanks, Partha

Hi,I will have a nm-hd-2v and three vic-2bri-s/t-te. My telco will be providing me with a 100 numbering range for these three bris. Is it possible to bundle the three ISDN and hence have capability to recieve/send six calls simultaneously using the...

Hi, can somebody tell me where can I set time that is displayed on ip phone? On CCM is right time displayed, but phones displayed different (+1 hour, its day saving time), I tried to restart phone but it did not help.

When I run CCMAdmin I get the following message on the Main.asp page:Cisco CallManager CDBLException Dump: [ActiveX object not initialized via insert or select]Does anyone ever came across with such an error message? I was not able to find any inform...

Hi,we have a CCM 3.3(4) and Cisco IP Phone 7960 with the firmware P00305000500.Overnight the IP Phones lost time sync. with the CCM. Our CCM is GMT + 1, and the phones are now GMT.All the device pool use CMLocal as the Date/Time group, and the CMLoca...

Any one got Caller ID and Caller Name working from the Telco to work? I have a CCM 4.02a install. PRI with Primary-NI2. I have found doc's on CCO that state it is supported from like 3.3.3X and up. Telco is telling me that they are sending name. ...

Does anyone know what the maximum file size (wav) or (mp3) that callmanager can handle. (Storing and playing, not cpu load on dropping) Is there a maximum or is the only issue disk space?

Hi all... New to the voip camp, and need some definite advice on how to proceed with the installation... I am going to be receiving my 2811 tomorrow, and have already purchased a bunch of 7960 and 7970 phones... I'm going to be getting a POE 16-po...

Hi guysWhat's the best way to see which channel on which PRI port from 6608 is used? Our customer setup the CCM so that longdistance goes pri 4 and 5 or port 8 when all of the pri 4 and 5 busy. The route list shows the correct order of the route grou...

I have 2 POTS Lines, 7314 & 7324. A 2610 router. I have 2 phones, 3401 & 3403. I am having trememdous issues getting SRST to function inbound and outbound and then having mgcp work when CCM is connected with inbound and outbound. I can never get ...

We have experienced two flavors of problems we think may be related to hookswitch sensitivity: a) phone continues to ring after the handset is picked up b) phone drops call - subscriber suspects hookswitch - troubleshooting indicates no network pr...

I'm trying to create a menu.xml file to deliver Extension Mobility to all of the phones.Here is a copy of my XML file:<?xml version="1.0" encoding="UTF-8"?><CiscoIPPhoneMenu> <Title>Seattle Mental Health Services</Title> <MenuItem> <Name>Extensio...