Other Collaboration Subjects

CCM 3.1.1 installed.I configured the extension mobility as decribe in the manual.When I try to make a login on the ipphone I reveive the login page, I fill it but nothing append.I search in the trace of the CRA engine, I found this :83: oct 07 00:24:...

Hi,<br><br>I saw a couple of people posting a similar question, but here's another one:<br><br>My extension is 4750. Unity's pilot number is 4010. From my extension I call 4010. Unity asks for my ID. I press "4750#". Unity replies, "Sorry this s...

Where can I find the newest release for the ATA-186? I think it's 2.12, right?Thank you,Paulo.

I have configured the CCM 3.1 . Want to use IP phone across the public internet..What confugration are needed on PIX 6.0(1) and at the DNS side so i can connect the IP phone through the internet

Hi all,Recently, we upgraded from 3.0(9) to 3.1(2c), everything looks fine so far, but there is one problem in IP Phone 7960. When I hit the "directory" button, it shows "Host not found", usually will show "missing call", "receieved call" and "place...

We changed the CM Ip adddress . We also changed the URls in The enterprise parametes to the New ip Address. When we hitthe Directories button, we get "Host not Found" Anywhere else we can look? Thanks

I have a client that has a pool of 3 external numbers. They need all calls destined for this pool sent to two operator phones. Both phones should ring and the person available will answer the phone. I initially setup a shared line and used a translat...

If I were need to perform a manual registration between an IP phone (Cisco 7960) and Call Manager, and I will like to basically install this IP phone with the IP address whose subnet (vlan) is different from the subnet (vlan) that the Cisco Call Mana...

I wish to know if it's possible to configure both a h.323 gatekeeper and gateway in a cisco 2611.The idea is: I have an ATA-186 behind the router, and I need to reach another ATA-186 in other location (behind another 2600), an also need to makecalls ...

CM 3.1(2c), SRST on 2620 with PRI. I followed all the sample configs. Inbound calls work fine. When I try to make an outbound call, I get fast busy after the first digit(no matter what I dial).Here is config:dial-peer voice 1 pots incoming called-...

I am trying to configure 6608 blade for connection to PSTN but I am not able to change status of the port to connect (it has always "notconnect"). I know that the line to my PSTN provider is ok.The Cat6509 is registered to my CCM cluster and is in t...

Last night, a router kicked, and our segment with Unity on it lost connectivity to the rest of the network, including Exchange.<br><br>This morning, the problem was fixed, but now certain phones (seemingly at random) will not turn off the MWI even af...

Hi,Can anybody help me in enhansing my knowledge domain by sending different case studies on integration of voice and data. Diagrams, Configurations etc etc.This could be with any layer2 tech, could include Packet Telephony stuff with VoX

Unity 2.4.6.135---CM 3.1(2c)---TSP 3.0.3<br><br>Here's the situation: When callers dial an extension from within a call handler, they are "released to (the) switch" and transfered to the users phone. During this transfer, the caller does not hear a...

What provides the resources for a call that comes in from the pstn on a de30+ for example you put one call on hold because you hit the answer button to take the second call then you want to transfer the second call.Where are these resourses coming fr...