Other Collaboration Subjects

I have a problem with SRST and the 7970/61/41s. When CCM is down they change in SRST-mode, they register with the router and get their numbers, but you can't make a call or receive a call. Also the Softkeys are still the same like in CCM-Mode. I have...

we are configuring remote site router as hardware transcoder resource. I notice there is a command sccp ip precedence . I think this is to change sccp signal precedence value. But one IOS we use it says for RTP packet. Does anybody know this? Thanks

I have a few users that require a longer phone cord, but I don't want to settle for a white or black cord. Are there any vendors that sell longer cords using the same color as the phone?

Hello! I'm looking into ways to dynamically set/remove "temporary" speed dial from my program. For example, when press a button, the program will load a set of phone numbers and map them as speed dials, which means user can press the speed dial butto...

what does UDP do with datagrams that arrive out of sequence in a VOIP system? are the datagrams discarded or passed to the next upper layer?

Folks- does anyone know of any decent click-to-dial applications that we can use with CME? I would like to give users the ability to highlight and dial a telephone number from a web application and/or embed specific URLs for dialing purposes. I gu...

I have been advised that a 2600 Router running the right IOS revision would provide SIP and H323 proxy communication to LCS?1. Can someone confirm this is indeed correct?2. How is this done?3. Can you provide a sample config. of the required equipmen...

Has anyone out there come across this before - A 7936 initiates a meet-me-conference and anyone dialling in to the conference has difficulty hearing what the user talking into the 7936 is saying because the speech is clipping. All other members of th...

Can you have callmanager control a PRI via MGCP but use H.323 for the analog ports? We're doing some TCL work that needs H323 but the customer wants CallerID with Name service which will force MGCP. Any suggestions?Thanks,ian

I recently deployed a Unity 4.0(5) UM integration and gave the users VMO to access their voicemail. Only problem is when they try to play back via the phone, the phone rings, the message plays but the call does not hang up after the end of message.Ca...

Hi, I want to delete the user's VoiceMails on demand. Does CCM can do that using JTAPI or other related programming interface? thanks in advance

E1 problem.The symptoms are as follows:When a user dials out from an IP phone, the time between the last digit being pressed and the ringing to begin is quite long. Sometimes it iss so long it drops out before the ringing can start.In the meantime , ...

Dear Sir,I bought Cisco 1751 since 2003, I found out one of VIC-2E/M to have problem for communication. I buy a new VIC2-2E/M to replace VIC-2E/M which you are no stock. Cisco 1751 can't recognize VIC2-2E/M, I think it was because the IOS version is ...

I have Callmanager 4.1.3 with 2851 acts as a MGCP Gateway connected to Seimens PBX using E1 PRI QSIG. I have issue with a Calling name. If I place a call from IP phone to a phone on Siemens PBX I do not see the Caller name. I can not check the Displa...

Hello,recently i installed one cluster : Publisher and Subscriber. I have more that 500 phone in my remote sites and i want make a load balancing for call processing; then register 250 to publisher and others to subscriber. When i enable the auto reg...