i've configured a CME with a PRI from my provider, they are sending 4 digits down, 2411 (confirmed in debug).2411 as a phone IS up and running, but callers are getting dialtone, the phone is not ringing.Any thoughts?
Hi all,We run CallManager 4.1(3) and have a problem with one of the 7960s. The Message Waiting Light has come on, and a message is displayed saying the user has new mail. Our problem is that we do not have any voice mail package associated with Cal...
Hello,The CSA agent is installed on my callmanager publisher, currently the CSA is disable.I want to enable it and I would like to the impact.Many thanksRegards,Christophe/
Help needed in how to design 1.)Sample "Bill of Quantity" for IP Telephony System for 150 users with Conferencing facility for 20 users with 10 Fax connections. Analog lines:16 and 1 E1 Trunk.2.) Sample Design of "Proof Of Concept" for IP Telephony i...
I use debug isdn q931 in cisco. For some call i got: Calling Party Number i = 0x1183,"xxxxxx"some call i got:Calling Party Number i = 0x1180,"xxxxxx"Can anyone tell me what is difference btw 1180 and 1183.RegardsHuong VU
Hello,i am a student doing my project on implementing SIP. I just wanted some pointers for the SIP and SIP open source code. So I can use that for reference for my project. I really apriciate your help,Thanks
Router A and Router B are 2611XM's. Router A is running CME and has 5 IP Phones. Both routers have FXO ports connected the local PSTN at their respective locations.Call Transfer will work under the following conditions:1. 1st IP phone calls up a 2nd ...
Hello everybody,I tried to use my program which shows the corporate directory on the 7940/7960s on the ip communicatr. Apparently I ran into the problem that the softkey buttons to submit the search parameters does not work. On the 7940/7960 after en...
Hello :We need to implement this :Set up your Hunt Pilot/Hunt List/Line Group.On your Hunt Pilot use the “Personal Preference field.”Write a little AXL Script that would allow the user to modify the “Coverage No Answer” point and not the hunt forward...
Hi We have CM 4.1.3 integrated to an Octel Voicemail using a VG248 (Analogue ports and SMDI)The analogue ports are all in a hunt group.When a user goes to check their voice mail and the first voicemail port is busy the first voice mail port clid is s...
When I receive a incoming call, I can hear the caller, but the caller hears garble or static on the line. Caller calls back and gets a clear connection.Anyone experience this?
I have several VG-224 in my installation which work really. Only thing I can't seem to solve is how to change network local for a VG-224. It will only select Unites States wich then given me the American off-hook and dial tone. It's no biggie but is ...
