Hi We have Catalyst 6006 switch.Supervisor : WS-X6K-SUP1A-2GEDRAM : 64MBCan anybody tell me the exact specification of the DRAM..?I mean what type of memory required (i.e. MHz, SD RAM or DDR RAM ..? ).
Hi We have Catalyst 6006 switch.Supervisor : WS-X6K-SUP1A-2GEDRAM : 64MBCan anybody tell me the exact specification of the DRAM..?I mean what type of memory required (i.e. MHz, SD RAM or DDR RAM ..? ).
I have a router 7206 which config snmp view,and solarwinds orion can't get information from 7206.Do I need add any other snmp entity to make orion works normal ? snmp-server view test local includedsnmp-server view test ciscoMgmt.48 includedsnmp-serv...
I have 2 core switches. A Cat 4006(Assigned Vlan1 - 10.100.1.30/24 and Vlan20 - 10.102.1.30/16) and Cat 4506(Assigned vlan1 - 10.100.1.31/24 and vlan20 - 10.102.1.31/16 connected via Gig Fibre. I have ports on both switches assigned do the vlans, 1 a...
I have a 3640 router. I have absolute-timeout set for 60 min. The router has modems that users dial into. Is it possible to get a banner or some kind of information to the users informing them that they have about 5min left before disconnection ? If ...
During an IOS upgrade to one of my 6509s I received a programming algorithm mismatch error. After a little research I discovered that the bootflash needed to be re-formatted, which I did. Then I made the mistake of rebooting the switch before copyi...
Hiif i have peer router with aggregate summary-only commands (the Origin code is incomp.) and the origin code for specific route is EBGPdoes it change the global aggregate route origin from ? to e and advertise it to the upstream router?Roi
Hey guys/gals,I'm looking for some feedback on how I should go about setting up my lan. Currently have a bunch of 3com switches connected via Matrix, and Fiber. They are being replaced with Catalyst 3550s. My questions is:What is the best way to s...
scenario;6500 series having a single sup2/msfc2 with pure IOS question;I've understood that if we hot insert another sup2/msfc2 with pure IOS even with different version, the IOS in the active sup engine, along with the configuration will be automati...
I'm setting up a lab with some old 2500 routers. I noticed that the EIGRP network command won't accept wildcards, and the route shows up in the table as a classfull route. I have tried the "IP Classless" command w/ no luck. The IOS is 12.0(9) and the...
Hello,I have a basic question on testing frame-relay on 2 cisco routers.One router is a 2610 with a Wic2t, one 2504 router with 2 serial connections.Is it possible to simulate a 2 frame-relay connections with both serial ports to the wic2t?Thanks in ...
helloWe have 7513router(RSP8).After Router booting, so have many error message..help me please..sh logSyslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: level debugging, 126 messages logged Monitor logging: lev...
Hi allI have 2 6500 series switches @ the distribution layer doin the intervlan routing for 1500 users..The access layer consists of 12 of 4500 series switches all dual homed to the 6500 switches.. The issue is that when i give a show cam dynamic o...
Hi, I would like to know, if there is any possibility to connect in a Switch Supervisor (Cat 5000, 4000), by a PC with Hyper Terminal, dial up in a modem and connect directly through console port, or another port, if applicable???Obs: A router in the...
I need to know the real difference between the catalyst 6500 and the router 7600.When should use one or the other?they possess important features differences?Thanks
we have a 6509 runing IOS (not cos) with DS3 atm interfacewe are runing 12.1 anyone has the experience or something I miss ?any idea is appreciated.6509SW#class-map match-all voice-rtp match access-group name voiceclass-map match-any video match ip...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
01-02-2025 05:53 AM | ||
12-30-2024 06:12 PM | ||
12-09-2024 05:41 PM | ||
11-14-2024 09:33 AM | ||
10-24-2024 11:51 PM |
User | Count |
---|---|
6 | |
1 | |
1 | |
1 |