if any one has any knowledge of trouble shooting DLSW peers please get in contact, we have issues with our DSLW constantly bringing up the ISDN line even though there is no network connectivity
I´d like to know how many years the little battery last (lifetime) in Supervisor Engine 2 in Catalyst 6506. I supossed this battery is used to keep the date and the hour.Thanks.
Hi,It seems latest IOS claim support for IEEE 802.1s. Nonetheless when using sniffer pro on those BPDUs they are not recognized as proper 802.1s packets (digest does not seems ok and some fields are not set according to the standard).Also, it seems t...
Please refer to below configuration. I have no problem with the access-list 110. The problem is the access-list 120, when there is a host at 159.254.205.0/24 segment try to access to the web server at 159.254.207.128/27 segment, it block by access-li...
I've been searching for nearly a whole day now without result, so now I hope anyone here are sharper than I am.I need to locate the SNMP object that holds the value of the signal/noise ratio for the upstream on a Cisco UBR7100 series Cable Modem Term...
I've looked around, and can't find this specific error message explained anywhere. I don't like cryptic messages, can anyone tell me loosely what's wrong, and what I need to do in general to fix it?Xfer Client: incorrect name (.) in non-authoritativ...
Is there a way to disable the CSU/DSU functions of the WIC-1DSU-T1's? I have a router currently terminating 2 PRI's with the WIC card. Eventually, I am going to have to move both PRI's to an Adtran Atlas, and pass the PRI's back thru to the router. ...
I"m trying to analyze traffice through a Cisco 1720 so I can finalize the ACL's to protect the network. Ethernet-0 is connected to the DSL modem, Ethernet-1 is connected to the DMZ network and the FastEthernet-0 is connected to the private network. ...
hi,we have an 3640 connected over 2xFrameRelayMultipoint and 2xFrameRelayPoint_Point.The P-P links have a much greater cost than the MultipointInterfaces - but the router always gets the defaultrouter over the Point_point Interfaces - Any Idea ???WHY...
Hi. I am trying to add image to the library in CW 2k Sofware mamangement. The image I am trying to add is c3500xl-c3h2s-mz.120-5.WC5.bin. I have tried the tar version of it too and images from 2900 series switches also with no luck. The image is goo...
Ok here is how I am blocking Peer to peer network programs.. I have this is many of our remote offices and it has not proved to be a problem for clients . Now in one of our offices a client has problems with his VPN being slow and dropping connection...
