Other Network Architecture Subjects

Hello,is it possible to use virtual templates together with local users? Or can I only use virtual templates tohether with an radius or tacas server?If it is possible to use virtual template wit local users, has anybody a sample config for this kind ...

My dlsw peers are connected the dlsw re has found the correct mac addresses' but the dlsw circuit will not open?

I am attempting to connect to 1751 routers w/serial interfaces via t1 line. Router "A" (host side) is identical to router "B" remote side. I want to keep them on the same subnet for simplicity purposes. I have performed this feat with csu/dsu modu...

If anyone can help it would be much appreciated.I am using a cisco 1721 with ADSL ip stream as our primary connection.I am using a default route pointing down dialer 1 as my primary route.I have also configured a secondary default route pointing down...

I'm trying to use the switch 3750 to route between a couple of networks. The switch is connected to the router but I do not want the router to route these two networks.The default network is 10.20.57.128/25, the second network is 10.57.9.0/28Here's m...

Most of our servers that are connected to a Cisco 3548 Switch are seeing extreme amounts of CRC errors, but I am not seeing any errors on the interfaces or uplink interfaces of this switch. Installed a new switch and moved some of the servers to this...

I've been experiencing some weird issues with 4 pieces of WIC-2T on a 2 pieces of 2FE2W NM in a 3640 router. Circuits connected to them would be unstable at times. Worst of all, at times 1 of the serial ports on the WIC could be down while the other...

Most of our servers that are connected to a Cisco 3548 Switch are seeing extreme amounts of CRC errors, but I am not seeing any errors on the interfaces or uplink interfaces of this switch. Installed a new switch and moved some of the servers to this...

Hi,i'm pretty new to this spanning tree protocol and layer 3 switching but I was wondering...If i have a redundant hierarchical network - with layer 3 switches in core/distribution and access layer, would I still need the STP or RSTP protocol to prev...

hi,i have a loopbackinterface (which represents a tdp-id).this router has two different ospf processes.is it possible (if yes - how) that this router probagates this adress in the two ospf-processes ???

I'm a relative newbie to cisco hardware, and I'm having trouble at apretty early hurdle. Having purchased an 837 for uk adsl access Ihave basic nat'd access working.However, one of my requirements was for an internal DNS server(serving authorative z...

if any one has any knowledge of trouble shooting DLSW peers please get in contact, we have issues with our DSLW constantly bringing up the ISDN line even though there is no network connectivity

Hi ,Does anybody known if CISCOWORKs is running with (ACRONIS, VMWare) Thanks

I´d like to know how many years the little battery last (lifetime) in Supervisor Engine 2 in Catalyst 6506. I supossed this battery is used to keep the date and the hour.Thanks.