Routing

Hi,When performing a mtrace on our devices, we always get these two lines within the trace. Can anyone tell me what this means?x.x.x.xx.x.x.xx.x.x.x 0.0.0.0 None Admin. Prohibited !RPF!10.1.x.x [default]0.0.0.0 PIM  [x.x.0.0/16]x.x.x.xx.x.x.xThanks,D...

Hi all,i need help with Policy based routing.    The branch router has two connections via GRE tunnel to HQ. all routers in question using EIGRP. I want all finance server traffic to use one of the connections to HQ and all other traffic to use the o...

Buen Dia a Todos.Quisiera saber cual es la diferencia entre shape peack y shape average cuando se configura una politica de salida en una int WAN, como en este ejemplo:policy-map SALIDA class Critical-Data  bandwidth percent 55 class class-default  f...

I have a 3560 that appears to have a hardware fault, and no service contract.  Do 3560s come with any inherent warrenty or am I out of luck?

Hi all,I want to achieve the following setup:So basically I have a C877 and a Cisco ASA 5505 and I want to push the public IP of the ISP to the outside interface of the ASA so the Cisco 877 will only be responsible for ADSL and PPPoA. Don't ask me wh...

Hi, I have to configure a BMG = 256 kbps on ADSL link. I would like to use aal5 and ATM vbr-nrt class.The question is: the line command that I should insert is "vbr-nrt 260 260 1"? Thank you very much.Regards.Giuseppe

HiWe have 2 completely different networks which we want, at a certain location, to bring physically on 2 (redundant) c3750's.1 of the 2 networks was already on those switches, and participates in ospf (as a stub area).So when the second network came,...

Hi,I want to configure Reliable static routing with object tracking. I have a cisco 3825 and 3925 router in which the hsrp will be configured . Now these two routers are connected a remote site via three different WAN connectivity as under1. MPLS2. L...

I am a new student to the CCNA,  I am trying to set up a basic lab.  The equipment that I have is as follows:netgear (wirless/router/switch) which at this time is the only way my network is setup (I have three workstations all windows base)Cisco 3750...

Hi I would like some advice on how to redistribute routes between three independently managed private networks. Currently: See attachmentThe two buildings managed by Company 1 are connected by 4x1GB fibre channel ports on Cisco 3750G Standard Image s...

Hi,I have a Cisco 2801, IOS  12.4(24)T2 (C2801-IPBASEK9-M) on a WAN link to another 2801, which appears to be wrongly detecting our cross-site EMC replication traffic as Skype.I am 100% sure that Skype isn't running on any of our PC's, yet the Skype ...