Hi, So recently I'm having fun with Cisco CSR 1000V which is virtual router and I noticed one thing. Under heavy load show process platform showing high usage around 70-90% meanwhile process CPU sits at 0-2%. Can you tell me what is the difference be...
Forum Posts
Resolved! Port forwarding and IPSEC VPN's
Hello, I have a multi-site network setup, each site containing a Cisco 2801 which takes care of internet routing and VPN setup.Each site has it's own private subnet and is connected to the main site using IPSEC site to site VPN through regular intern...
I am trying to establish a Layer 2 tunnel between separate unlinked 2 sites. All I've been provided is an internet connection on both ends that resides behind natting. Is it possible to have my routers connected up in the natted (so 192.168.1.x with ...
Hey community! We have a Cisco 4331 or 10 in our environment. Below is our current QoS policy. When I do a "show access-lists" I don't get a count for matches for access list 101, which is used in our QoS policy. Does that mean the access list isn't ...
Resolved! C9300 - Device Tracking
Hi All, What is the equivalent of the below on a C9300? ip device tracking probe count 30ip device tracking probe delay 10 Thanks! Best. EDIT: Would this be the best source? https://community.cisco.com/t5/switching/ip-device-tracking-new-cli-sisf-...
I have attached the topology I've implemented but when I try pinging the PCs from other, I get the 'Destination Host Unreachable' message.
Hi! This is my first time asking for help. I'm a complete begginer with packet tracer and my english isn't very good.Well, i have this packet tracer network: The problem is that when I configure the Router "Queretaro" with RIPv2 to advertise the VLA...
I've got a ISR4451-X/K9. IOS is isr4400-universalk9.16.03.07.SPA.bin. I'm trying to configure a terminal server but when i try this is my message: terminal-server(config)#menu ? % Unrecognized command terminal-server(config)#menu ^ % Invalid input de...
Hello, I am trying to procure the part number: ACS-2821-51-FANS which is part of the Cisco router p/n: CISCO2821. These are a pack consisting of 3 individual fans. I've learned that the original part number, ACS-2821-51-FANS, is obsolete and trying...
Im trying to advertise two sub-interfaces ip networks via eigrp. Is this possible?
HI!How can I make Sub-Interfaces on Supervisor Engine WS-720-3B?Thanks.
work for a medium size company. We have a 5508x firewall with IPSEC Remote Access VPN setup on it and an AnyConnect setup too. These work fine when an individual client logs in with client software. We have a remote warehouse that uses the VPN buy...
Hi All, Can someone help me to get is resolved as in my scenario iBGP learn route in getting advertise to eBGP neighbor.I am doing MPLS setup in GNS3 so i have design this topology like one ISP backbone and two customer site. i have enable mpls on PE...
Hi all, So a port scan on our 3945 ISR shows a service listening on port 10000. I ran show control-plane host open-ports but there was nothing on port 10000. Can anyone advise what this might be or how I can find what it is? cheerssk
Hi,How can we check for open ports on router/switch?
