Switching

Hi Guys,I'm after a bit of advice.In my environment I have a pair of Fortigate firewalls configured in a Active-Passive configuration, that are connected, through a 802.3ad interface to a pair of stacked Cisco 3750X (distribution). I also have a down...

Hi All,I would like to know about what session id and cookie does with the request from the client to the server?As per my understating, Session id is created by the server to the client for any new session intiated by client.Cookie is also a small d...

7k Upgrade Path from 4.2 to 5.1.3:I'm trying to confirm if I definately need to upgrade from 4.2 to 4.6/5.0 before I go to 5.1.3 for system and kickstart?And then for EPLD, I see a few hops in the path, can I upgrade straight from 4.2 to 5.1?Thank yo...

Good Day!We just have a Cisco 1900 Series installed on our  network. Using lease connection from Globe Telecom our Service provider  using Radio wave( I dont know if thats the proper thing to call). I just  have some question,..1). Is it proper that ...

Hi, i have a network of 192.168.11.0/24 that is needed to be subnetted to one /26 network and two /30 networks. I want to keep all the rest of available hosts after subnetting to be available in the largest network blocks possible for future use. So ...

What router should we use for offices in SF---Posted by WebUser Jinal Jhaveri

Hi,I have a customer with a stack of three Catalyst 3750 switches running IP Base 12.2(55)SE1.They want to add a 3750X switch to the stack to create a mixed stack.I cannot find anything that discusses in detail what will happen with the software imag...

What wifi router works best with the comcast business service in San Francisco?---Posted by WebUser Jinal Jhaveri

Hi,We have our network segmented in VLANs, and at one branch office, we had some problems cause someone used the gateway IP in a device. We use as gateway a Cisco Catalyst 3560-G 24T-S IOS 12.2(58)SE2.I would like to know if I have some way to block ...

Hey,I'm seeing a bit of a strange issue here, and I'm wondering if I'm doing something wrong on the 3560 platform. Basically, I cannot clear a mac sticky on an interface. acc-sw#clear port-security all interface gi 0/30 acc-sw#Sep 26 06:26:48.082 PDT...

Hi,I have on my switch PVSTP enable, as you can see from "show spanning-tree summary" command output below :Switch is in pvst modeRoot bridge for: noneExtended system ID           is enabledPortfast Default             is disabledPortFast BPDU Guard ...

We have run into an issue between a couple of N7Ks in a vPC topology. We have the N7Ks set up with the "vpc peer-gateway" and we have several SVI's between them running HSRP. The issue is that we have a situation in which 4 of the SVIs on the one N7K...