Activity in Technology and Support
Only allow Client VPN Access via AD Group (3105)
Hi There, I have configured Remote VPN on Cisco Secure Firewall 3105 - V7.3.1-19.I have also created an AD Realm using LDAPS which works with my base DN. I Am able to login with ANY user on anyconnect client However if i put the DN path of my secur...
FMC 7.4 and multi-instance FPR3130 chassis upgrades
We are in the process of deploying some multi-instance FPR3130 pairs. The FPR3130's were supplied with 7.2.8-25 so we manually upgraded them to 7.4.2-172 and then onboarded them into the FMCv where we then converted them to multi-instance. We then ...
Reuse Object Group in a single ACL line
hi,i'm trying to configure a global ACL and reuse the same object group in a single ACL line.i got a warning saying 'config is redundant' but when i checked, it was accepted.my question is, can i ignore the warning and my ACL would still work? i don'...
IP And MAC Address Issue
I am having issue with one of my desktops connected to my switch interface flipping between two MAC addresses (see the attached picture below for log). When I disconnect the desktop the IP and the MAC issues will not show in the log. I reimaged the ...
TLS not found
Hello,People can send me emails sometime and I can see that TLS 1.3 was in place, some time same sender is not able to send me email and get this bounce back alert"The following message to *@domain.com was undeliverable.The reason for the problem:5....
VXLAN Static Ingress Replication: NVE Peers Up, No Remote MAC Learning
Dear @I am experiencing an issue with VXLAN static ingress replication on a pair of Nexus switches running NX-OS 7.0(3)I7(2). The setup consists of two leaf switches (NX-6 and NX-7), where VLAN 100 is mapped to VNI 5000 on both switches. Each switch...
Resolved! SWITCH
I need help to install a package that can help me to connect to a rooter and a switch. I cannot connect to this device:- 3 rooters:cisco 1900 series (1921)cisco 2900 series (2901)cisco 7301 series- 3 swicth:Catalyst 2960 series (ies ver:12.2/35)SESCa...
Can we do wireless upgrade from DNAC simultaneously?
Can we do wireless upgrade from DNAC simultaneously
Resolved! Unable to view setting in CLI which is configured via GUI
HelloRecently, I have configured a few settings on Cisco ISE NDM Version: 3.0.0.458.Configuration is present on the GUI, but it is not reflected CLI.Administration >> System >> Logging >> Local Log Settings >> Local Log Storage Period. However, I am ...
Resolved! Catalyst Center 3.1.3 on AWS ?
Anyone @ cisco here know what the timeframe is for v3.1.3 to be added to the AWS marketplace?Right now I'm using v2.3.7.9 for lab POC & writing training content... should I be waiting for v3.1.3 ?Is there a big change in the UI between v2.3.7.9 and v...
911 Calls routing to a 911 call center in another state?
Hello,Out of my 1,600 devices I have one dept that when I call 911 it calls out to a call center for 911 in Colorado? but the rest of my phones calls our local 911 dispatch office? I have checked the devices they are set up correctly as the working p...
Resolved! Analog Trunk between TWO PABX System
Hi, We have a strange requirement from our customer to connect two PABX systems over an analog trunk.Currently, analog phone is connected to PABX A over 1 pair cable. Our customer wanted to connect PABX B in place of the Analog phone to have a one-li...
CSCwm49782 - enhance sma 2nd cruz heartbeat logging
Hello Guys, I´m having this problem and after upgrade I will try reload device. Has anyone reloaded device before upgrade ?
Security Intelligence feed/list change alerts
All,I've been tasked with obtaining an alert whenever a security intelligence feed or list is added/removed/modified within Security Intelligence but only have been able to find a means to alert on events discovered from SI.Might anyone know of a way...
Disable weak cipher and TLS on CISCO Firepower Management Center
We are using CISCO Firepower Management Center for VMWare with software version 6.1.0.3 (build 57) and Software Version 6.2.3.14 (build 41). During our VAPT assessment it’s been detected that this use weak cipher and TLS. I did login via web browser...
| User | Helpful Count |
|---|---|
| 87 | |
| 64 | |
| 54 | |
| 50 | |
| 48 |
