Hi Eveyone,I’m in the process of replacing some older phones (7945 and 7965) and I’m a bit undecided between moving to the newer 9841/9861 series or going with the 8841.If you’ve used these models, I’d really appreciate hearing your experiences and r...
I have 2 cisco stacks with 2 switches of IE-9320-26S2C each with firmware 17.12.04. We have etherchannel configured between the two switches with the physical interfaces from each members on the stack.When we power off one of the switches in the stac...
The phone is registered to cucm now. From the procedure here. On CUCM phone's page you have to turn on 'Web Admin' and enter a password. But there is no option for that only Web Access. And that doesn't get you to the att console for the 9851. https:...
I am getting ready to deploy 800 or so 9841 phones. On the phone config, the buttons for Disable Speakerphone, Disable Speakerphone/headset and Disable Handset are missing.My question is, how do I add that into CM to make them like all the other phon...
To help new Workflow users get started we'll be posting some example workflows here until the Workflows Exchange is ready. Please feel free to ask any questions about these workflows here. Check out the new Cisco Workflows Self-Learning Samples Vid...
I have a question I'm hoping somebody can explain in layman's terms for me regarding the inner workings of line rate speeds. I've attached a very basic drawing of an example camera network. A PoE camera connects via Ethernet to a local switch at 1 G...
I'm working with a customer attempting to set up IPSec connectivity between their Firepower appliance and my Azure Site-2-Site VPN Gateways.My Azure S2S Gateways are running in an active-active pair. The customer is running their Firepower appliances...
Hi- trying to create a sandbox, and have been for over an hour. I keep getting emails that my sandbox encountered an error while launching. I don't have multiple instances running, and I think out of 120 available instances only 77 are up. I tried co...
I need to configure the switches so that every movement, without exception, is treated as best-effort. I have no implementation experience in QoS, so I have prepared this configuration and am wondering if it will be sufficient.switch(config)#qos basi...
This video demonstrates the integration of Duo Single Sign-On (SSO) with Cisco Secure Client, showcasing how it enhances the security of remote VPN access by providing a streamlined Multi-Factor Authentication (MFA) experience that integrates seamles...
This video guides you through the process of protecting your applications with Duo's Two-Factor Authentication (2FA). It covers the necessary preparation, configuration steps in both Duo and your application, important considerations for reliability,...
Hi Champs,Is it possible to call VXML mirco-app directly from ICM admin script rather than routing script. I have a requirement to call a VXML application to update some custom tables on specific dates / time e.g office close / open hours. So i want ...
This video demonstrates how to enhance the security of remote VPN access by integrating Duo Multi-Factor Authentication (MFA) with Cisco Secure Client, leveraging the Duo Authentication Proxy. Why this integration is important: Enhanced Remote Acces...
This video provides a comprehensive overview of Cisco Duo, addressing its new capabilities on Identity and Access Management (IAM). It details how Duo has evolved beyond traditional Multi-Factor Authentication (MFA) to become a powerful security laye...
