Activity in Technology and Support
Hotspot Connect with Anyconnect
Hello everyone,I am using AnyConnect Secure Client version 5.0.00529. Client authentication with the ASA is performed using a machine certificate. The entire process works perfectly. Now I want the Windows client to be able to log on to a hotspot fir...
C1300 Switch support IPv6 routing
Hi Did Cisco c1300 x version support IPV6 routing and RIPng?
Rogue dhcp
we have a 9407 and several small business edge switches, we recently had an issue where we lost internet connection in the whole facility, we started troubleshooting using elimination; we were able to identify the switches that created the issue. How...
Asa to FTD migration
Hi All, I have learn somewhere we can migrate Asa to FTD (manage on box) via CDO. How we can i free access of CDO for such purpose
The Strangest Wireless Network Issue!!!
Hi teachers, I have recently encountered a strange issue. During the normal use of our wireless network, there will suddenly be a loss of Internet connectivity. If I then click to disconnect and try to reconnect to the same WIFI, it will keep showing...
Switch looping solution needed
Hi, is there any way I could link these 3 switches and make the ports green without causing a loop. (L2 only)
eigrp
hi can you tell me what is the problem i cant ping pc c to the serverthank you
A-FLEX-3 Enhanced Calling
Hi team, I have 10 A-FLEX-3 Enhanced Calling version 15 licenses for the CP-8865-K9, and I am currently using CUCM version 11 or below version 15.So I would like to ask: Are these 10 licenses compatible with CUCM version 11? Do I need to upgrade CU...
FlowCollector Longest Export Exceeded after transition to datastore
Today I made transition to flow collector with datastore.Since then I get major alarms "FlowCollector Longest Export Exceeded after transition to datastore" every hour from different network devices.Why does this appear after transition to datastore?
Catalyst Center Get Device List in Workflows
Trying to figure out and understand how I can use the Catalyst Center Get Device List API within Workflows and extract all of the responses into a single variable or table please. The Get Device List API has a maximum output of 500 devices per API ca...
Copy SG300 software img between 2 same switches
I have 2 SG300 10P switches in my network and have different software S1: 1.1.2.0 and S2: 1.4.8.6.I look @Cisco Support to Upgrade S1. But because the SG300 is ELO support I cannot download the Software any more and want to use the img on S2.However ...
9174E Question
Hi, anyone knows is using AFC is mandatory for 9174E APs or I can still get away from enabling AFC if I stay within Low Power Indoor (LPI) on 6Ghz.
CML 2.9 Link Issues
Hello, I am curious if anyone else is experiencing the same issues that I am with attempting to make new link connections between devices that are already running?I have recently installed the latest bare metal deployment of 2.9.0 and if i have nodes...
Creating Call Park Simulation App
Hello Trying to create a simulated call park solution using CTI Ports for my business, where we are receiving calls answered by Reception, and then blind transferred to a CTI Port, the call is then answered and held by the CTI Port. When that CTI ...
do we need to configure DNA license on cisco 8300 if we are not using
Hi, we have new purchased catalyst 8300 router with network-advantage and dan-advantage(mandatory). For initial setup, do we need to configure dns license under exec mode. We are not using DNA center to manage the devices. Currently I just run the fo...
| User | Helpful Count |
|---|---|
| 68 | |
| 54 | |
| 51 | |
| 49 | |
| 41 |
