Activity in Technology and Support
wireless clients cannot print a printer on different VLAN
Hi All,I am asked to look into the issue that mentioned above.wireless clients on 192.168.70.0 / 25printer on 192.168.3.0 / 25they can ping fine, but the wireless client cannot see the printer, even I used the IP address to add a new printer, it show...
ISE captive portal issue on client
Captive portal is not popping up on client automatically while connecting to guest SSID. But if we open browser enter neverssl.com then it redirects to captive portal and allow us to complete guest registration and sign on process. Also receiving cer...
DHCP server shown as blocked, but relayed DHCP still works
Hello Meraki Community,I am trying to understand how the Block DHCP Servers policy is enforced by Meraki MS switches when a DHCP relay agent is involved.TopologySwitching: Meraki MS switches throughout.Routing & Relay: A Check Point firewall handles ...
Data Connect - query endpoints_data and ENDPOINT_IDENTITY_GROUPS
Greetings all, Is there a way i can use dataconnect and get endpoints that belongs to endpoint identity group ? with ERS api this is pretty easy but with dataconnect i can not find any of the fields that refer to each other. None of the columns are m...
Resolved! Setting NTP Server Firepower ASA 1100
How to set up the NTP server configuration on the Firepower ASA 1140 device,ciscoasa(config)# ntp server x.x.x.x Is this correct?
C1300-24XS:Interface Show Operational Status UP After Shutdown Command
Hi,I'm using a stacked configuration with C1300-24XS switches and have configured LACP between the C1300-24XS and a C1300-24P-4X stacking switch.When I issue the following command on interface te2/0/12:C1300-24XS(2)(config)#interface te2/0/12C1300-24...
Introducing Push API public beta 🤖
We’re excited to announce the public beta of Push API, an event-driven alternative to repeatedly polling the Meraki Dashboard API.API rate limits can make frequent polling difficult to scale, especially as network environments grow. Push API enables ...
Cisco SD-WAN vManage Configuration Database password change
In my environment, I am planning to change the configuration database password.Cisco Catalyst SD-WAN Getting Started Guide - Cluster Management [Cisco SD-WAN] - CiscoWould like to check what is the risk associated with this? Even if I follow the proc...
vSmart , vBond : admin password change
This is regarding changing the vBond and vSmart admin password.Our SD-WAN environment is up and running for many months now.As per our security guidelines it is necessary to change the admin passwords of vBond and vSmart.I would like to know the belo...
Using ISE 3.5 to restrict commands via TACACS on switches
Hi all,I am having a terrible time trying to figure out how to get ISE to restrict commands that user groups can execute on network switches via TACACS. I have no problem setting users with access level 1 or 15--that works great. But if I try to ut...
How Do You Troubleshoot Slow Network Performance?
Hi everyone,I’ve been looking at different ways to troubleshoot slow network performance, and I’ve noticed that the hardest part is often figuring out where the problem actually starts.When users report that the network is slow, there can be several ...
DNS Defense DNS Override
Hi,Does Cisco Secure Access provide a feature similar to the DNS Override functionality available in OPNsense?If not, is there any similar feature or configuration that can be implemented in Cisco Secure Access?I would appreciate your help with this.
802.1x with no autonegotiation
What are your experiences with using 802.1x in combination with fixed speed and duplex settings on interfaces?Although autonegotiation is preferred, within the project this is a secondary topic and not a prerequisite.What potential limitations or iss...
Resolved! FCS and alignment erros
Hi,What is the difference between FCS errors and alignment erros ? Both have a bad CRC ?Thanks,Navid
ISE 3.4 Posture policy for Kaspersky endpoint Security v12.x
Hello Team, I am evaluating Cisco ISE for my company, going well except for my posture policies.I have on my PCs Kaspersky endpoint Security v12.x, when I try to create posture policy for this application running state it's not working a...
| User | Helpful Count |
|---|---|
| 120 | |
| 89 | |
| 83 | |
| 73 | |
| 47 |
