Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We’re excited to announce the latest addition to the Cisco Workflows Exchange: Copy Meraki Switch Port Configurations Workflow! This powerful workflow makes it simple to copy switch port configurations from one Meraki switch to another — whether you’...
Hi! I did connection tests before closing packet tracer and it was working. I closed packet tracer because I wanted my ping screenshots to look nicer, and now DHCP will not work on the branch. I'm afraid I might have forgot to save any configurations...
HiI have a cluster/site of 150AX and 151AXM. I need to upgrade the firmware to add new devices. However, no matter what I do, I get:Invalid tarfile or extractionI have tried to remove one mesh extender to check that it was not corrupt, but then the e...
I am unable to connect to the DevNet Sandbox I have tried the Open VPN connect that has send me down a troubleshooting hole (It doesn't work). I am not able to download the Secure Client from Cisco. So how do you connect to the DevNet box? This shoul...
Hi All,I am preparing for ISE upgrade from current version 3.3 patch 8 to patch 12 .Prior to upgrading, I did the system and operational backups and also exported and saved the system certs.1. Do I need to export all trusted certs as well and save th...
Hi experts ,we have FMC managing our FTD's and version is 7.5 Recently few users had some issues connecting via the VPN while they are working from home, and i was struggling to troubleshoot the issue from FMC as haven't used FMC much in recent year...
Hello! I have a lab with CUCM and a FreePBX, when ever I make a call from a CUCM phone to any FreePBX Phone and place them on hold I get no CUCM hold music. I don't get a beep (since making any internal CUCM call (ex CUCM Phone 1 to CUCM Phone 2) hol...
I am setting up a SIP trunk on CUCM 15.0 SU4, but it is not working right.It appears to be a Search Space/Partition issue, but I can't figure it out.For incoming calls, I have it set to accept 4 digits so it can dial direct to the phones.The Trunk ha...
Hello,I’m trying to add my home static public IPv4 address to my OpenDNS Home account:The IP is permanently assigned by my ISP and is currently in use by my home office connection.However, my OpenDNS dashboard shows 0 networks, and when I try to add ...
I am having an issue with the Web User Interface (WebUI) on a Cisco Catalyst C9300-24P running IOS-XE 17.15.05.When logging into the WebUI via HTTP, navigating to the File Manager shows a completely blank/empty screen. No file paths or folders (like ...
we have some issues with 2 devices both have 100Mbps adapters (no POE) and when we connect the device the ports stay down, we don’t se any log about STP negotiation and it is not any port security configuration.we connected the same devices to a c920...
I’m preparing to upgrade an ISR4431/K9 that is already running in INSTALL mode.show boot confirms the router boots from: bootflash:packages.confIf anyone has a full, modern ISR4431 install‑mode upgrade sequence, including install remove inactive
I've been using CISCO Secure Client for years on my MacBoo Pro with MacOS Ventura 13.7.8, but recently, after the connection, CISCO started mandatory upgrade to version 5.1.20.333. The download and install is completed but after that, CISCO opens lik...
