TelePresence and Video Infrastructure

Hello,I could not find in the available documentation what is the maximum cable length between the ISDN PRI port of a MSE 8321 (or GWY3201).I see it should be a STP cable.I also see in the advanced ISDN settings Line lenght = short/long but in the he...

I have talked with Vaddio about the possibility of Cisco sending a code to the Vaddio Camera to frost the glass when it goes to "privacy" mode. They say the only way to do that is send the Power off command.Is there a way Cisco can be made to send "P...

Hi all!I am trying out to configure the VCS Starter Pack Express Version:          X7.0.1I've followed the Cisco_VCS_Expressway_Starter_Pack_Deployment_Guide_X5-1 guide.All of the steps are done. All necessary DNS configurations are done as well. Clu...

I'd like to use a multicast audio stream option instead of sound card option.I found following document on cisco website which tricked audio stream by manipulating TTL.But I could not find a way to make TTL to 1 for multicast stream from CallManager....

Question on the event logs being kept in the C-Series,  in MXP codecs when someone does a hard reboot or the unit reboots itself the logs are lost as compared to when it is a soft reboot.  I see the C-Series logs have current and historical.  at what...

Does anyone have a list of port usage for the EX90s they can share?

Hi,We currently have a 6000MXP codec running F3.2 software.  Is there a specific upgrade path that I must follow to upgrade to F3.9?Are there any licensing considerations?Many thanksOliver

HiDoes anyone know what is the SKU for the DNAM module used on the 3000MXP?Thank youRegardsEdgar

Hi All  Can some one help me to setup FXS WIC card with Call manager 8.5 and also used for SRST mode.Head office :    2911 router, ISDN WIC card, FXS wic card and CUCM 8.5Remote Site 2911 router , ISDN WIC Card ,  FXS WIC card , no call manager , en...

HiDeployment is one VCS Control with two VCS Express as neighbors. The two Expressways has a traversal to two internal VCS Control.PUA is enabled on VCS Global and both Expressway. Only VCS Control has Presence Server enabled.Scenario 1:External endp...

Hi, We have vcs control and vcs expressway (dmz) in our network. We would like to integration both vcs control and vcs expressway to AD only for Movi users. All the other endpoints registered to VCS control  and VCS expressway   should be treated as ...

Can someone confirm the number of phones that can be configured with a 2811 router.  The router currently has PVDM2-16 module but I also see PVDM2-36DM?  If upgraded to the PVDM2-32 what is required to make this happen? Is this a hot swappable module...