TelePresence and Video Infrastructure

Hi Folks,I have an issue here. We have a few remote offices in other countries. Each country has their own 7936 conference phone. all works perfectly fine except for one. The phone grab an IP address for the voice segment but fail to register with ca...

hi,can anybody hlp me with the cisco 2800 router that supports video streaming?we have a customer that does online interview and we need to stream the interview from one point on the network to another. Big thanks

When I run the respective upgrade utilities and click 'customise' I get a list of software that can be upgraded on the units but not all of the available components are ticked. For example the 3521 BRI gateway allows me to upgrade the 'Gateway Applic...

I need to configure QOS for video over gig fiber LAN(4506 catalyst switch) to LAN(3500 switch)

What are the QoS requirments for the Cisco TelePresence 3000 connected to a Cisco 6500 running CAToS? Thanks in Advance.

We recently purchased the IPVC3515 MCU and I currently have it configured for H323 registering to a cisco IOS gatekeeper which is in turn registered to our CCM 4.02 installation. We just added some Video Advantage cameras that will successfully conn...

Srs, I have a 3527 gateway connected to the TANDBERG. When a receive a call from ISDN network, the first channel is open but the others channels not open. The Telco say that later connected first channel it need receive number of other channels and...

we are plaaning to set up a link from india to dubai wherein we can send live streaming video. is something possible that we can send a unicast from india and in dubai,thrugh some device etc it gets converted into multicast?? What things i should kee...

I wanted to know about split imaging in a VC conference. Basically we have received requests from individuals receiving a video image that they do not want to see their own image one screen A, while two smaller images are spilt between screen B. What...

Voice over IP (VoIP) supports the redirecting call feature of the VoIP gateway for ISDN calls. The redirecting number is an optional field of the Q.931 setup message. When a local exchange carrier (LEC) switch detects an incoming call that is destin...

Hi, Got a weird problem with my CCM4.0(2)SR1; let me explain :Have 2 different regions (central office + remote site); when I call from the outside to the central office (using the g711alaw codec), I may transfer calls to wherever I want; but when I ...

Hi Guys,I need some advice how can i enable my Cisco GW to get INfo digits from my Carrier going to my ISDN Switch.Im using IOS version 12.4(2)T1Cisco AS5400HPX (R7K) processor (revision T) with 524288K/65536K bytes of memory.Processor board ID JAE08...

Hello, Please i have a router series of 1700's. i have fixed the voice card.Please can you put me through with the configuration to connect the two site together,pleease help.All your is highly appreciated

I am have issues trying to get QOS working correctly over a Serial Int for a customer of ours. We are doing MGCP over a T1 to an Adtran IAD which is the customer VOIP gateway.When I do a sho policy-map int f0/0, which is the interface to my core, I k...

Is there a way to make an analog phone connected to an FXS port a part of a call pickup group that contains both analog phones & IP phones? I setup a lab and used MGCP to add the gateway and I was able to add the DN associated with the FXS port to a...