TelePresence and Video Infrastructure

I have a DX80. We are using this a a monitor/phone. The issue right now is this:The PC output is DVI and I have an adapter on the DX80. The adapter is HDMI to DVI to connect with the PC. It works fine but if your gone for a few minutes the display go...

Enter the Fully Qualified Domain Name (FQDN) of the traversal server. If you are using secure traversal, then this value must be either the Common Name or one of the Subject Alternate Names on the traversal server's certificate. IP addresses or hostn...

Hi folks,We are deploying a new project with Mobile Remote Access solution in order to allow Jabber client to communicate from internet. These are the version and servers that we have:CUCM 10.5.1Presence 10.5.1Expressway-C and Expressway-E running 8....

I am working with a government customer that will need to have a codec switch between secure and unsecure modes of operation on the fly.  They apparently don't have any kind of management system in place and I would need to do this from the AMX contr...

Hi All   I have Ciscoexpressway C and E setup for business to business calls The Telepresence endpoints are registered with CUCM and are with internal doamin    Now when I make a business to business calls, the called party gets xxxxx@internal-domain...

Hello,  do you know any kind of data cable(name) for a device Cisco cts-ctrl-dvc8, which its length is at about 5 - 10 metres? Thank you for your answers.

Hi All,   How can I check how many user has login to TMS. Thanks, Dayalan M

Hi.. We are deploying Video solution with Conductor and TP Server along with CM. We have below licenses for conductor . Please help to clarify how does PMP and below license will work. LIC-SMP-STARTERKITLIC-VMCNDTR-PMP-PKLIC-EXPE-PMP-PAKLIC-CNDTR-PMP...