TelePresence and Video Infrastructure

Is there any documentation explaining the differences between upgrading our Telepresence Software from TC7.3.8 to CE8.3.1? I'm currently aware of the changes with the Remote Controls and the Touch Pads but I'm trying to find more information regardin...

i have sip call from sx80 end point  TP end point register to VCSc version x6.1 and routed through CUCM 11.1 and again routed through Acano 1.9  we are seeing call is not connected and logs show request timeout 408 in VCSC & CUCM , and bye message

I have a mic60 mic but the cable was damaged. I have no guarantee. What cable can I use from another manufacturer to replace it since I have the connector euroblock but not the cable

When customizing the CMS, we only want to replace 1 wav file – and don’t want to re-record all the rest This seems possible, from the guidelines; “On the web server create a directory for the IVR customization files and place in it all the files list...

TMS version 14.5 and above contains a statement in the Admin Guide regarding the number of CUCM servers that can be added to TMS.  "Cisco TMS only supports adding one Unified CM cluster".This statement was not in 14.4.x and below.We have a customer t...

Hello, in our organization we have approximately 100 Cisco edge 340 DMP's in production. We typically manage these devices using their web GUI, however I was curious if there is a CLI reference sheet available to help us manage them using SSH. Thanks...

Hello,On a customer site, we have a telepresence infrastructure:- VCS-C 7.2.2- MCU 4501- C20 and EX90 endpoints in the LAN and remote sites (~30 endpoints) all running FW TC6.2.0The endpoints are registered in the VCS-C using SIP protocol only, no en...

Pls suggest, Can we Control Cisco Precision 60 Camera by 3rd Party Method ??? In my scenario, Will be using 10-12 Cameras; Will be Connecting it to SX80 Codec with the use of Switcher... Need to understand on the control of Camera; Can we control vi...