TelePresence and Video Infrastructure

I recently ordered some license under TP-SMP-K9. following is the odering list. Then I received some E-delivery license.But there is NO PAK with LIC-SMP+and LIC-SMP-STARTERKIT. Only LIC-VMCNDTR-PMP-PK ,LIC-EXPE-PMP-PAK ,LIC-CMS-PAK,LIC-SW-EXP-K9 ,LI...

Hi, Is it possible to use both CUCM and TMS with TelePresence Conductor?The TMS deployment guide for Conductor only mentions VCS for call control... Thanks, Simon 

Now, I have a Precision camera 20x. I want to check it but I don't know how can do this. Who can show me the ways ?

Hello All,We are trying to make B2B calls using Expressway-C and E to call outside domain ,We have Unified CM & IMP 10.5.2 .All SRV DNS records and Public IP Addresses are published on the ISP as MRA is working Perfect.We followed Cisco Validated Des...

Hi all, We just won a Cisco Telepresence Project with a customer who has in his existing WAN Network a “WAAS” Solution “deployed 5 years earlier”. My Questions are: The “WAAS” solution can have an impact to the Telepresence in WAN Network? If yes, w...

Hello, We have an sx20 codec (TC7.3.6) used to be registered to our CUCM and TMS server using TLS secure profile. This was working fine until we removed it from the CUCM and used it in a point to point Set up. We tried to register it back to the CUCM...

I have a client that currently has Expressway C/E deployed for MRA.  I have questions related to two of the licensing changes that have been introduced in x8.8/8.9. Currently they have an equal number of RMS licenses on both the C and the E servers t...

I have a client that currently has Expressway C/E deployed for MRA.  I have questions related to two of the licensing changes that have been introduced in x8.8/8.9. Currently they have an equal number of RMS licenses on both the C and the E servers t...

Hello, We have four sx20 codecs (TC7.3.6). In Two of these the camera would automatically turn straight once a call is established. In the other two the camera would stay in its stand by position and has to be moved by the touchpad controls. I have c...