Hi, We have a customer with 400 endpoints and it is a massive job creating the phone book manually. So we have decided to use the TMS Phone book. From the endpoints (h.323, SIP) when we search, it only display the one entry for each endpoints i...
Hi, We have a customer with 400 endpoints and it is a massive job creating the phone book manually. So we have decided to use the TMS Phone book. From the endpoints (h.323, SIP) when we search, it only display the one entry for each endpoints i...
Hi,I tried to install second TMS 14.2. in DMZ and to connect it SQL database in internal TMS.I am not able to connect to internal TMS database when using "IP_ADD_InternalTMS\tmsng". I received error that server does not exist or access is denied and ...
Hi I have a client report thated Audio is distorted at remote room while Audio cable ( for shared presentation cable) is plugged into local PC during presentation. Local user is playing vedio from PC, somehome, the audio of vedio played at remote roo...
Hello everybody,Yesterday I did an upgrade to TMS14.2 and TMSPE 1.1. When I try to open Systems > Provisioning > Devices I got an empty page. Is anybody seeing the same behaviour?And is it possible to get the S-I-Ds of the clients from another page?R...
Hi!I had an upgrade from TMS12.2 (via 12.6 and 13.2) to TMS14.1.1.When I go to: Systems > System Overview and select all systems and all parameters I get an error message.A college mentioned before he had some issue with the ip zone values. Can it be...
Hi all,Is it possible to connect an SX20 to a directory server that is NOT TMS?Datasheet says:Unlimited entries using server directory supporting LDAP and H.350 (requires Cisco TelePresence Management Suite)But admin guide says:Unlimited entries usin...
Hi, I am following this document to create a CSR for the certificateshttp://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Certificate_Creation_and_Use_Deployment_Guide.pdfThe openssl commands to create the certificat...
I just found out that we are no longer able to pull up CDRs from our Tandberg Classic endpoints (all running E5.3). Is this something I can fix in admin settings of TMS?
Hello,Im installing TMS 14.1 on Windows Server 2008 and at a moment of the installation i receive the bellow error and the installation is stopped."Unhandled ExceptionError number: 0x80131501Description: It was not possible to convert some or all i...
Hi all.I have a CTS 3200 with a HFR codec and extra side LCD displays.When not in a call and sharing presentation the laptop image is displayed on the side screen. Floor screen and on the center main display.However when in a call and sharing present...
Hi,I have been searching all over, but cannot find information on how to reset password on the E20 unit.The particular unit have TE1 software installed, and is currently in Wrong Username or Password.Are there any guide on how to do this?
I have been reviewing the documentation located at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/7_0/english/administration/guide/7925cfgu.html#wp1336223When I try and change the phone configuration for a 7925G handset - namely the 'web ...
Hello to all,One of our customers currently use:2 CTS 30001 CTS 1300CUCMCTS Managermultipoint SwitchNow he needs to make calls through the Internet.My questions are:Can I use a firewall traversal solution with VCSC in the trunk with the CUCM?If I use...
Hi Quest about AD user integration vs Non AD user integration and if its possible? We currently have a VCSc v7.2, VCSe v7.2 and TMS 13.2.2 running TMSPE. We would like it for our internal users to be integrated with AD so they are able to use ...
Hi there,I have an Cisco SPA501g IP phone which is connected to my home router.When the phone rings it only does for 60 seconds then goes to voicemail. I need to extend the ringing tomeout, but I can't see an option anywhere.Any help would be great.T...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-08-2024 12:23 PM | ||
08-02-2024 05:48 AM | ||
08-01-2024 12:01 AM | ||
07-30-2024 03:24 PM | ||
07-29-2024 10:10 AM |