TelePresence and Video Infrastructure

I am running into a problem trying to get authentication working between my TMS 13.2 server and my VCS Controller and Expressway running 7.1 code.I need to authenticate to the TMS with no integration to AD or LDAP at present.It was working a while ag...

Hi, I have a Tandberg  CTS-C60-K9 device, but without the Multisite license. Now I have acquired the license "L-C60-MS" and I am confused on how to upload the license. I will appreciate documentations on step-by-step procedure on how to upload this l...

Hi All,Please help me the following issue. I don't wanna open a TAC case for this...So Our Customer has a Cisco C20 (tc5.1.3) with 2 LG 50PA5500. The problem is that the codec could not switch off the television after you goes stand by, you just only...

Hello, What should the default call rate be set on a EX/C to achieve1. 1080P2. 720PThanks in advance.

Hello all,  We are attempting to learn the E20 to showcase it at a SMB demo in a few weeks, and I am having issues with our in-house testing.  I have a E20 running TE4.1.1.273710 with H323 enabled.  I have it configured for a static IP address howeve...

As I understand, TMSXE 3.0 is to be installed on a separate server from Exchange. Should it be installed on TMS server or different server altogether? TMS is appliance ver. Thanks in advance.Sent from Cisco Technical Support iPad App

My customer has VCS-C and TMS and VCS Starter Pack. We intend on deploying everything in the traditional model. Do I have to migrate SP to the full Expressway product or can I leave it as is?Is there anything it cannot do while configured as the Star...

I've a configuration with a VCS Expressway Starter pack (X7.1) where Ethernet interface 2 is connected to a internal network 192.168.x.x and Ethernet interface 1 is directly connected to the Internet (via a router of the Internet provider).On the ins...